Sealey DFS35M Quick Start Manual
Text of Sealey DFS35M Quick Start Manual
35L DUST-FREE WET & DRY INDUSTRIAL
VACUUM CLEANER PLASTIC DRUM CLASS M
FILTRATION SELF-CLEAN
MODEL NO: DFS35M
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND W
High powered units designed for use with power tools. Model No. DFS35M is also suitable for use with air power tools. Certified for Class M
dust extraction in accordance with EU directives, which protects the operator from dust particles hazardous to health. Supplied with Ø36mm
flexible hose, multi-diameter tool adaptor, crevice tool, power tool cord clamps, Class M bag filter, Class M cartridge filter and foam filter,
Model No’s PC3511
Ensure the machine is unplugged from the power supply.
7.1.2.
Remove the motor housing and with the raised rim uppermost fit the filter cartridge tube down over the filter basket and push fully
home. Place the locking disc onto the top of the filter and turn the locking bar until the latch drops into the slot in the top of the filter
cage. Continue turning clockwise until the filter is fully locked down.
7.1.3.
Reposition the motor housing onto the
Sealey DFS35M 9. FILTER CLEANING FIG.7
9.1.
Handle the filter carefully when cleaning or installing. Unlock and carefully remove the cartridge filter and inspect it for damage. A filter
that has small holes or tears in it will not perform efficiently and should be replaced.
9.2.
To clean a dry filter, tap it inside a waste bin. (The cartridge filter is designed for dry vacuuming only). Should the filter be inadvertently
wetted it should be rinsed from the inside and al