View Glazier Test Tool Manual 

The View Glazier Test Tool (GTT) is a portable, convenient way to test the View IGU, IGU Smart Window Connector, and cable operation. In a 30-60 second test, the GTT will indicate whether the windows, Smart Window Connector, and cables are connected and operating properly. This device should be used on all View installations as per the belo ...

Kit contains: Glazier Test Tool, Smart Window Connector Caps, Alligator Clip Cable, Grounding Connector, Silicon Cover, and DC Charger What is included: Connect the Grounding Connector to the M8K connector on the top of the GTT. Connect the alligator clip cable to the side connector of the T. How to assemble: Glazier Test Tool 010-101 ...

Turn on the GTT by holding down the center button for 3 seconds. The LED lights will turn on to indicate the device is on. Ensure there is available battery charge by checking the battery indicator as shown below. If the charge is low, charge the device using the included 12V DC Wall Charger. The GTT can take up to 8 hours for a full ...

If the test is passed for the final onsite installation, apply a green TESTED label (as provided by View) to the IGU cable or Smart Window Connector and move on to the next test. Step 4: Start test Once the GTT indicates it is ready to test, press the test button to begin testing. The test can take up to 30 seconds to be completed. Th ...

Q: The GTT is charging slowly. Is something wrong? A: The GTT requires 8-10 hours for a full charge. Q: How can I be sure the alligator clip is connected to the frame? A: The best way to ensure a connection is to attach the clip to a raw (unpainted or anodized) part of the frame after installation; in most framing system this could be ...