Scilogex SCI-T6-Pro Operation & User’s Manual

Text of Scilogex SCI-T6-Pro Operation & User’s Manual

SCI-T6-PRO/S Tube Rollers
12300265 User Manual SCI-T6-Pro SCI-T6-S LCD Digital Tube Roller Analog Tube Roller Please read the User Manual carefully before use, and follow all operating and safety instructions! Technical specifications and outline are subject to change without prior notice. www.scilogex.com
Preface ................................................................................. 1
Service ................................................................................. 1 Warranty .............................................................................. 1 1. Safety Instructions ......................................................
Welcome to the “Tube Roller User Manual”. Users should
read this manual carefully, follow the instructions and procedures, and beware of all the cautions when using this instrument. Service When help needed, you can always contact the service department of manufacturer for technical support in the following ways: SCILOGEX, LLC 1275
1. Safety Instructions
Warning! • Read the operating instructions carefully before use. • Ensure that only trained staff works with the instrument. Protective ground contact! • Ensure the socket must be grounded (protective ground contact) before use. • When working wear personal safety guards to avoid the risk of: - Splashing liquids
2. Proper Use
The instrument is designed for mixing sticky substance in schools, laboratories or factories. It can be installed on a variety of impeller, for different viscosity of the medium. This instrument is not suitable for using in residential areas or other constraints mentioned in Chapter 1. Do not use the accessories recommended by the
4. Control and Display
4.1 Control Figure 1 Figure 2 Items Default settings Mode switch button Mode Shift speed and time display. Speed /timer control knob Set speed and time by rotating speed/timer control knob. Push on/off to start/stop rotating function. Speed/timer light Speed/Timer Green/Red LED display light. Different colors of LED light
LCD displays the real working state
and all setting values. Power switch I/O Switch ON or OFF the instrument. Table 2 Figure 3 Items Default settings Speed control knob Rotating speed control knob to start/stop rotating function. Power light Green LED display light. Power LED light shows green when switch on. Power switch I/O Switch
Place the Rotator in safe and stable surface, ensure the
required operating voltage and power supply voltage matched, and the socket must be earthed reliably. • Connect the power cable. • Switch ON instrument. • The instrument begins self-checking. • When initialization is over, LCD displays the last running values of s
7. Maintenance and Cleaning
• Proper maintenance can keep instrument working properly and lengthen its lifetime. • Do not spray cleanser into the instrument when cleaning. • Do not remove the power line when cleaning. Only use recommended cleansers: Dyes Isopropyl alcohol Construction materials Water containing tenside / Isopropyl alcohol
Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

Scilogex Laboratory Equipment Owners Instructions: