Philips AC0817 Operation & User’s Manual

Product Overview  ...........................................................................................6 Controls overview  ........................................................................................... 7 3 Using the air purifier  ......................................................... 7 Understa ...

future reference. Danger • Do not clean the appliance with water, any other liquid, or a (flammable) detergent to avoid electric shock and/or a fire hazard. • Do not spray any flammable materials such as insecticides or fragrance around the appliance. Warning • Check if the voltage indicated on the appliance corresponds to the local power voltage before you connect the appliance. • If the power cord is damaged, you must have it replaced by Philips, a service center authorized by Philips, or similarly qualified persons in order to avoid a ha ...

regular vacuum cleaning, or use of an extractor hood or fan while cooking. • Always place and use the appliance on a dry, stable, level, and horizontal surface. • Leave at least 20cm free space around the appliance and leave at least 30cm free space above the appliance. • Do not sit or stand on the appliance. Do not place anything on top of the appliance. • Do not place the appliance directly below an air conditioner to prevent condensation from dripping onto the appliance. • Only use the original Philips filters specially intended for this appliance. Do not us ...

or radon (Rn). It cannot be used as a safety device in case of accidents with combeustion processes and hazardous chemicals. 2 Your air purifier Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Product Overview Control panel Air outlet Power on/off button Base NanoProtect filter Series 2 (FY0194) Air quality sensor Power socket 3 Pin plug adapter* (KA1801A-2400750BS) *Please use only the 3 pin plug adapter provided. ...

Understanding the air quality light The color of air quality light corresponds to the ambient air quality. The brightness of air quality light reflects the current running mode. PM2.5 level Air quality light color Air quality level ≤12 Blue Good 13-35 Blue-purple Fair 36-55 Purple-red Poor >55 Red Very poor Filter replacement alert Air quality light Mode switch/ Filter reset button ...

Remove all packaging of the filter before use. Note: Make sure the air purifier is unplugged from the electrical outlet before installing the filter. CLOSE OPEN CLOSE OPEN 1 2 3 4 5 1 Rotate the base anti-clockwise to remove it from the appliance. 2 Pull the filter out from the appliance. 3 Remove all packaging materials of the air purification filter. 4 Put the filter back into the appliance. 5 Reattach the base and rotate it clockwise to fasten the base. Connecting power Note: Risk of electric shock! When you unplug the AC power cord, always pull the plug from the socket. Never pull the cord. Connect the power adapter t ...

You can choose Auto mode, Turbo mode or the Sleep mode by pressing the mode switch button . The brightness of air quality light reflects the current running mode: • Sleep mode-lowest brightness • Auto mode-mid level brightness • Turbo mode-highest level brightness Auto mode In Auto mode, the appliance selects the fan speed in accordance with the ambient air quality. Turbo mode In Turbo mode, the air purifier operates on the highest speed. Sleep mode In Sleep mode, the air purifier operates quietly at a low speed. 4 Cleaning Note: •• Never use abrasive, aggressive, or flammable cleaning agents such as bleach or ...

Regularly clean the inside and outside of the air purifier to prevent dust from collecting. 1 Use a soft, dry cloth to clean both the interior and exterior of the air purifier. 2 The air outlet can also be cleaned with a dry, soft cloth. Cleaning the air quality sensor Clean the air quality sensor every two months for optimal functioning of the appliance. Note: •• If the air purifier is used in a dusty environment, it may need to be cleaned more often. •• If the humidity level in the room is very high, condensation may develop on the air quality sensor and the air quality light may indicate a poorer ...

Understanding the healthy air protect lock This appliance is equipped with the healthy air protect lock to make sure that the NanoProtect filter is in optimal condition when the appliance is operating. When the filter is almost expired, the filter replacement alert ( ) lights up red, which indicates that it needs to be replaced. If you do not replace the filter in time, the filter replacement alert ( ) will flash. The appliance will stop operating and get locked. Replacing the filter Note: •• The filter is not washable or reusable. •• Always turn off the air purifier and unplug from the electrical outlet before r ...

) displays on the screen. After replacing a filter, you need to reset the filter lifetime counter manually. 1 Press the power button to turn on the appliance. 2 Within 10 seconds after power on, press and hold the mode switch button for 5 seconds to reset the filter lifetime counter. 6 Storage 1 Turn off the air purifier and unplug from the power socket. 2 Clean the air purifier, air quality sensor and the surface of the filter (see chapter ‘Cleaning’). 3 Let all parts air dry thoroughly before storing. 4 Wrap the filter in air tight plastic bags. 5 Store ...

does not improve, even though the appliance has been operating for a long time. •• Check if the packing material is removed from the filter. •• Make sure that the filter is properly installed. •• The air quality sensor is dirty or wet. Clean the air quality sensor (See the chapter "Cleaning"). •• Room size is large or the outdoor air quality is poor. For optimum purification performance, please close the doors and windows when operating the air purifier. •• There are indoor pollution resources. For instances, smoking, cooking, incense. •• Filter reaches the end of life. Replace the ...

If you need information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Consumer Care Center in your country (you can find its phone number in the worldwide guarantee leaflet). If there is no Consumer Care Center in your country, go to your local Philips dealer. Order parts or accessories If you have to replace a part or want to purchase an additional part, go to your Philips dealer or visit www.philips.com/support. If you have problems obtaining the parts, please contact the Philips Consumer Care Center in your country (you can find its phone number in the worldwide gu ...

15 ZH_HK 目錄 1 重要事項 ...............................................................................16 安全 ........................................................................................................................16 2 您的空氣清新機 ..................................................................18 產品概要 ..............................................................................................................18 控制鍵概覽 .........................................................................................................19 3 使用空氣清新機 ...................................... ...

維修中心或類似的合資格人士來更換。 • 若轉接器、電源線或產品本身已受損，請勿使用。 • 僅使用隨產品提� ...

• 燃燒濾網可能造成對健康無可挽回的危害及/或危及他人生命。 不要使用濾網作為燃料或類似用途。 • 避免以硬物碰撞產品（尤其是產品的進氣口或排氣口）。 • 請勿將您的手指或其他物件放入進氣口或排氣口，以免造成身體 傷害或產品故障。 • 若您使用室內煙型驅蚊劑，或該地方有油跡、� ...

請前往以下網址註冊您的產品，以獲得 Philips 的完整支援： www.philips.com/welcome。 產品概要 控制面板 排氣口 電源開/關按鈕 機座 NanoProtect 濾網 系列 2 (FY0194) 空氣質素 感應器 電源插座 3 腳插頭變壓器* (KA1801A-2400750BS) *請使用提供的3腳插頭變壓器。 ...

19 ZH_HK 控制鍵概覽 3 使用空氣清新機 了解空氣質素指示燈 空氣質素指示燈的顏色與空氣質素環境對應。 空氣質素指示燈的亮度反映現時的運行模式。 PM2.5 水平 空氣質素指示燈的顏色 空氣質素水平 ≤12 藍色 良好 13-35 藍色-紫色 一般 36-55 紫色-紅色 差 >55 紅色 非常差 濾網更換提示 空氣質素指示燈 模式切換/ 濾網重設按鈕 ...

拔下。請勿拉扯電源線。 連接電源變壓器至： • 首先，連接至產品上的電源插座。 • 然後，連接至牆上� ...