Perle IDS-409G Hardware Installation Manual

Managed Industrial Ethernet Switches Updated: October 2019 Version: A.2.1.10.2019 Document Part#:5500379-10 www.perle.com ...

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS GUIDE ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS GUIDE ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLI ...

Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

Preface Audience This guide is for the network or computer technician responsible for installing Perle IDS series switches. Familiarity with the concepts and terminology of Ethernet and local area networks is required. Purpose This document describes the hardware and physical characteristics of the Perle IDS switch. It ...

Overview This chapter discusses the following topics: • LED Indicators • Switch Model View • Ports • Port Status Indicators The table below gives a brief overview of the models covered in this guide. F ...

Switch Models Views IDS-409G-xxxxxxx IDS-409G-xxxxxxx-XT 1 – Terminal Block for Power 1, 2 8 – Terminal Block – Relay, I/O 2 – Status LEDs 9 – Fiber Status LED 3 – Console Port – serial 10 - 1000 ...

IDS-409G2-xxxxxxx IDS-409G2-xxxxxxx-XT 1 – Terminal Block for Power 1, 2 8 - SD Card Slot 2 – Status LEDs 9 – Terminal Block – Relay, I/O 3 – Console Port – serial 10 – 10/100/1000 Base-T Port 4 ...

IDS-409G3-xxxxxxx IDS-409G3-xxxxxxx-XT 1 – Terminal Block for Power 1, 2 8 - SD Card Slot 2 – Status LEDs 9 – Terminal Block – Relay, I/O 3 – Console Port – serial 10 - Fiber Port Status LED 4 – ...

LED Indicators P (Power Inputs) Sys (System Status) Alr (Alarm) BC (Backup Coupling) State Description Green P1 and P2 Power inputs within specifications Yellow P1 or P2 Providing power within specifications R ...

RM (Ring Master) State Description Off Ring Master not activated Green - solid Ring Master Active, redundant port blocked. Coupling Link enabled Green - flashing Ring Master unable to establish a ring due to m ...