Perenio PECSS01 Installation And Operation Manual

PECSS01 Smoke Sensor ©Perenio IoT spol s r.o. All Rights Reserved Doc Version: 2.5.1 Page 3 of 33 Introduction The Smoke Sensor is a device that provides for timely detection of visible smoke particles in the area of installation. It can be used as a part of the Perenio Smart Building Management System after b ...

PECSS01 Smoke Sensor Doc Version: 2.5.1 ©Perenio IoT spol s r.o. All Rights Reserved Page 4 of 33 Responsibility and Technical Support The present document is prepared in accordance with all necessary requirements and contains detailed information on the device installation, configuration and control valid as ...

PECSS01 Smoke Sensor ©Perenio IoT spol s r.o. All Rights Reserved Doc Version: 2.5.1 Page 5 of 33 Conformance to Standards The device is CE certified and complies with requirements of the following Directives of the European Union:  2014/53/EU Radio Equipment Directive (RED);  2004/30/EU Electromagnetic ...

PECSS01 Smoke Sensor Doc Version: 2.5.1 ©Perenio IoT spol s r.o. All Rights Reserved Page 6 of 33 Details on available Certificates are specified in Section 6 of the present document. For copies of Certificates and Reports, please visit a corresponding Section at perenio.com. BG CZ DE ES FR GR IT KZ LT LV NL N ...

PECSS01 Smoke Sensor ©Perenio IoT spol s r.o. All Rights Reserved Doc Version: 2.5.1 Page 7 of 33 Table of Contents Introduction ..................................................................................................... 3 Copyrights ................................................................... ...

PECSS01 Smoke Sensor Doc Version: 2.5.1 ©Perenio IoT spol s r.o. All Rights Reserved Page 8 of 33 Figures and Tables Figure 1 – Smoke Sensor Exterior ..................................................................... 10 Figure 2 – Buttons and Indicators .................................................. ...

PECSS01 Smoke Sensor ©Perenio IoT spol s r.o. All Rights Reserved Doc Version: 2.5.1 Page 9 of 33 1 General Description and Specifications 1.1 General Purpose The Perenio® PECSS01 Photoelectric Sensor is a Zigbee-based device intended to detect visible smoke particles (flameless stage). It is used as part of ...

PECSS01 Smoke Sensor Doc Version: 2.5.1 ©Perenio IoT spol s r.o. All Rights Reserved Page 10 of 33 Figure 1 – Smoke Sensor Exterior Figure 2 – Buttons and Indicators Buttons, Ports and Indicators Test Button/ Indicator When pressed once, the beep sounds in the standby mode (It is used to check normal opera ...