Sauder 408726 Manual
Text of Sauder 408726 Manual
Need help? Visit Sauder.com to view video assembly tips or chat with a live rep.
Prefer the phone? Call 1-800-523-3987.
Share your journey!
sauder.com
For all your
newfangled gadgetry.
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-18
Français pg 19-21
Español pg 22-24
Lot # 372058
05/06/15
Purchased: __________________
Be sure to give us a ring before
making any returns. 1-8
Table of Contents
Assembly Tools Required
Part Identifi cation
Hardware Identifi cation
Assembly Steps
Français
Español
Safety
Warranty
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Skip the power trip.
This time.
3
4
5-18
19-21
22-24
25-26
27
408726
www.sauder.com/services
Page 2
Part Identifi cation
å
While not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identifi cation to help identify similar parts.
Now you know
our ABCs.
A2
RIGHT END (1)
B
LEFT END (1)
C
LOWER RIGHT END (1)
D3
UPRIGHT (1)
E3
SMALL UPRIGHT (1)
F2
TOP (1)
G3
DESK TOP (1)
HH3
SHELF (1)
I
BOTTOM (1)
J
BACK (1)
K2
SMALL BACK (1)
L
MODESTY PANEL (1)
M
KE
Hardware Identifi cation
å
Screws are shown actual size. You may receive extra hardware with your unit.
408726
www.sauder.com/services
Page 4
BLACK 1-1/8" PAN HEAD SCREW - 1
KK
BLACK 7/8" FLAT HEAD SCREW - 2
FF
WASHER - 1
Y
PIVOT HINGE- 2
X
BROWN 7/16" LARGE HEAD SCREW - 2
HH
BLACK 1-7/8" FLAT HEAD SCREW - 8
DD
CAM COVER - 7
BB
CORD CLIP - 1
AA
EE
BROWN 1" FLAT HEAD SCREW - 4
SCREW COVER - 11
CC
II
GOLD 5/16" FLAT HEAD SCREW - 4
HANDLE -1
Z
MAGNETIC CAT
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å
Assemble your unit on a carpeted fl oor or on the empty
carton to avoid scratching your unit or the fl oor.
å
Push ten HIDDEN CAMS (S2) into the ENDS (A2, B, and C),
UPRIGHT (D3), SMALL UPRIGHT (E3), and SMALL BACK (K2).
Then, insert the metal end of the CAM DOWEL (T2) into each
HIDDEN CAM.
408726
www.sauder.com/services
Page 5
A2
B
C
D3
E3
K2
Arro
Fasten the CABINET RIGHT (30AA) and CABINET LET (30AB)
to the LEFT END (B) and UPRIGHT (D3). Use four GOLD 5/16"
FLAT HEAD SCREWS (II).
Step 2
408726
www.sauder.com/services
Page 6
Roller end
Roller end
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
II
B
D3
Finished edge
Finished edge
Remember:
Righty tighty.
Lefty loosey.
Fasten the SMALL UPRIGHT (E3) to the SMALL BACK (K2).
Use a BLACK 1-15/16" FLAT HEAD SCREW (113S).
Step 3
408726
www.sauder.com/services
Page 7
E3
K2
BLACK 1-15/16" FLAT HEAD SCREW
(1 used in this step)
113S
Finished edge
Finished edge
Surface without
HIDDEN CAM
Surface with
HIDDEN CAM
Fasten the SMALL UPRIGHT (E3) and SMALL BACK (K2)
to the TOP (F2). Tighten two HIDDEN CAMS.
Step 4
408726
www.sauder.com/services
Page 8
Surface with
HIDDEN CAM
E3
K2
F2
Start
Tighten
Arrow
Minimum
190 degrees
Caution
Risk of damage or
injury. HIDDEN CAMS
must be completely
tightened. HIDDEN
CAMS that are not
completely tightened
may loosen, and parts
may separate. To
completely tighten:
Arrow
Maximum
210 degrees
Fasten the DESK TOP (G3) to the SMALL UPRIGHT (E3)
and SMALL BACK (K2). Use two BLACK 1-15/16" FLAT
HEAD SCREWS (113S).
Step 5
408726
www.sauder.com/services
Page 9
E3
K2
BLACK 1-15/16" FLAT HEAD SCREW
(2 used in this step)
113S
Long fi nished edge
Unfi nished surface
G3
For support, place packing
foam and magazines here.