Viavi HST-3000 Quick Card

© 2012 JDSU. All rights reserved. HST-3000 VDSL QUICK CARD 5(6,67,9()$8/7/2&$7,217(67,1* (5)/) ...

© 2012 JDSU. All rights reserved. V D S L 2 Q U I C K C A R D Resistive Fault Location (RFL) Test Purpose Th e purpose of this test is to identify and locate resistive fault conditions such as shorts, grounds and battery crosses faults the presence of which may have been indica ...

© 2012 JDSU. All rights reserved. V D S L 2 Q U I C K C A R D Resistive Fault Location (RFL) Test Two Methods for Performing an RFL Test Separate pair method (CAT 500 H/W) Th e separate pair method is preferred because it is the only method that can be used for a double-sided f ...

© 2012 JDSU. All rights reserved. V D S L 2 Q U I C K C A R D Resistive Fault Location (RFL) Test Two Methods for Performing an RFL Test RFL Test Single Pair Method (CAT 500 H/W) Single pair testing should be used only if the separate pair method is not an option. Th is situati ...

© 2012 JDSU. All rights reserved. V D S L 2 Q U I C K C A R D Resistive Fault Location (RFL) Test Two Methods for Performing an RFL Test RFL Test Single Pair Method (CAT 500 H/W) (continued) It is possible to have more than one gauge of wire over the length of the cable. Th ere ...

© 2012 JDSU. All rights reserved. V D S L 2 Q U I C K C A R D Resistive Fault Location (RFL) Test Two Methods for Performing an RFL Test RFL Test Single Pair Method (CAT 500 H/W) (continued) Multi-Gauge Cable Span: Technicians use the multi-gauge setup option to accurately mea ...

© 2012 JDSU. All rights reserved. V D S L 2 Q U I C K C A R D Resistive Fault Location (RFL) Test CAT 510 Hardware: In eff orts for continuous improvement, the latest hardware circuit board (CAT 510) adds new RFL functions and features, outlined below. Green on Ground- Instead ...

© 2012 JDSU. All rights reserved. V D S L 2 Q U I C K C A R D RFL Test Cat 510 Hardware K-Test Th e HST-3000 equipped with the CAT 510 copper board adds an additional RFL test feature called K (Kup- fmuller) Test. Th e K-Test highlights its to locate double sided cable faults w ...

© 2012 JDSU. All rights reserved. V D S L 2 T E S T RFL Test Cat 510 Hardware Using the K-Test 1. Using the HST-3000 Ohm meter, the technician identifi es two conductors which meet the above criteria for the K-Test. It is important to note these can be any two conductors in the ...

© 2012 JDSU. All rights reserved. V D S L 2 Q U I C K C A R D RFL Test Cat 510 Hardware Using the K-Test (continued) 7. Th e HST will determine if the ratio between conductors is correct. If an invalid ratio is present the HST will abort the K-Test. 8. To determine CAT version ...