Walker Edison BLWS Assembly Instructions Manual

Text of Walker Edison BLWS Assembly Instructions Manual

Please visit our website for the most current instructions, assembly tips, report damage,

or request parts. www.walkeredison.com Revised 03/2017 Copyright © 2010, by Walker Edison Furniture Co., LLC. All rights reserved. P.1 (Work station and assembly instructions for both twin size (BTOL) & full size (BDOL) loft bed work station)

Copyright © 2010, by Walker Edison Furniture Co., LLC. All rights reserved.

Remove the bolts, washers and plastic plugs shown above from the bunk bed frame.

Copyright © 2010, by Walker Edison Furniture Co., LLC. All rights reserved.

Remove the long crossbar from the bunk bed frame and turn it over so the screw holes are facing forward. Reattach the long crossbar to the bunk bed frame using the bolts and washers from Step 1. Loosen, but do not remove the bolts that anchor the short crossbars to the bunk bed frame.

Copyright © 2010, by Walker Edison Furniture Co., LLC. All rights reserved.

Attach angle brackets (E) to crossbars (1,2) using medium bolts (A) and washers (B).

Copyright © 2010, by Walker Edison Furniture Co., LLC. All rights reserved.

Attach crossbars (1,2) to the bunk bed frame using medium bolts (A) and washers (B). Retighten the bolts that secure the short crossbars.

Copyright © 2010, by Walker Edison Furniture Co., LLC. All rights reserved.

Attach crossbar (3) to the bunk bed frame using large bolts (C) and washers (B).

Walker Edison Indoor Furnishing Owners Instructions: