Parkside PDSS A1 Manual 

Text of the manual

KOMPLET DODATKÓW NA SPRĘŻONE POWIETRZE

Wskazówki dotyczące obsługi i bezpieczeństwa Tłumaczenie oryginalnej instrukcji obsługi KOMPLET DODATKOV ZA KOMPRESORJE Navodila za upravljanje in varnostna opozorila Prevod originalnega navodila za uporabo PŘÍSLUŠENSTVÍ PRO PNEUMATICKÉ NÁSTROJE Pokyny pro obsluhu a bezpečnostní pokyny

Operation and Safety Notes

Page 5 PL Wskazówki dotyczące obsługi i bezpieczeństwa Strona 11 SI Navodila za upravljanje in varnostna opozorila Stran 17 CZ Pokyny pro obsluhu a bezpečnostní pokyny Strana 23 SK Pokyny pre obsluhu a bezpečnostné pokyny Strana 29 HR Upute za posluživanje i za Vašu sigurnost Stranica 35 DE / AT / CH Bedienungs- und Si

Table of contents

Introduction Proper use ......................................................................................................................Page 6 Features and equipment ...............................................................................................Page 6 Included items ................................................

Air tool set PDSS A1

 Introduction Please make sure you familiarise yourself fully with the way the device works be- fore you use it for the first time and that you understand how to handle the device correctly. To help you do this please read the accompanying operating instructions. Keep these instructions in a safe place. If you pass

Volume flow rate:

Typically XXX - XXX Ltr. / Min. Sound pressure level: xx dB(A) Sound power level: xx dB(A) Values determined in accordance with EN 14462 (EN1953/A1:2009). Safety advice WARNING! Read all the safety advice and instructions. Failure to observe the safety advice and instructions could result in serious injury and / or damage to property

NOTE: The compressed air source must be fitted

with a (filter) / pressure reducer so that the air pres- sure can be regulated.  Connect the product to a suitable compressed air source by connecting the quick-release coupling of the air supply hose with the plug-in nipple 4 to the product. It locks itself in place automatically.  Using the tyre in

Do not allow any liquids to enter the device.

Otherwise the device could be damaged.  Clean the device frequently; for best results, do this immediately after you have finished using it.  Clean the housing with a dry cloth.  Service centre  WARNING! Have your device repaired only by qualified specialist personnel using original manufacturer part

Other Power Tool Manuals