Veeder-Root C342 Series Technical Manual

Text of Veeder-Root C342 Series Technical Manual

Your Veeder-Root brand Series C342 panel instrument is powered by an external 12 - 24 VDC supply,

features an 6 digit LED display, and is housed in a ultra compact 1/32 DIN package. This model has been configured at the factory to perform one of the following functions: Count Totalizer, Position Indicator, Time Totalizer (Hours:Minutes:Seconds), Time Totalizer (Hours, 1/100 re

O V E R V I E W

INSTALLATION Dimensions Panel Mounting Make the recommended panel cutout. Place the included gasket over the rear of the unit and place the unit in the panel cutout. Slide the panel mount bracket into place over the unit's rear allowing the bracket tabs to engage the grooves on the case. Continue to push forward until the bracket arm fits snugly against the panel. VEEDER-ROOT 123456 48 mm 24 mm 60 mm 8 mm Bracket Arm Mounting Grooves REA

S E T U P

OPERATION Low Speed NPN Input: Configures the unit to accept a sinking or dry contact input and sets a filtering speed of 30 Hz High Speed NPN Input: Configures the unit to accept a sinking or dry contact input of up to 7.5 kHz Low Speed PNP Input: Configures the unit to accept a sourcing input and sets a filtering speed of 30 Hz L0 NPN L0 PNP PNP 1 NPN H H1 High Speed PNP Input: Configures the unit to accept a

1675 N. Delany Road

Gurnee, IL 60031–1282 Phone: 847.662.2666 Fax: 847.662.6633 Danaher Controls G E N E R A L Printed in U.S.A. #702085-0001 February 13, 1997 Revision none SPECIFICATIONS Count /Time Input: Count Input: NPN or PNP Signal field selectable Count Speed: 30 Hz or 7.5 kHz max Logic: Low < 0.7 VDC, High > 5 VDC Minimum Pulse Width: 70 µsecond Maximum Input: 30 VDC Quadrature Input (C342-8562 only): Type: Line driver or square wave puls

Veeder-Root Monitor Owners Instructions: