Timotion TEK05 Assembly Manual

All rights reserved TEK05 - ASSEMBLY MANUAL PACKING LIST Step 1 Step 3 Step 4 Step 2 Step 5 Frame Pre-assembled frame set Outer pipe Conection pipe Control box Motor Aluminum extension set Cable clamp Screw for Connection pipe, M8x12mm Screw for Control box, M4x6mm Column End pipe Feet Rubber washer Accessory Handset AC cable Hardware screw for Column, M6x16mm Screw for Feet, M10x16mm Screw for Handset, Ø4x22mm Screw for Tabletop, Ø5x20mm Allen key for Feet, 5mm Allen key for Column, 4mm Allen key for Aluminum extension set, 2mm TIGHTENING TORQUE Tailstock Screw for Column Screw for Feet and Tabletop Screw for Handset Make sure all screws are tightened, also after a period of use! pcs 2 2 1 1 1 7 8 2 2 2 2 18 pcs 1 1 pcs 8 8 2 18 1 1 1 Maximum 6Nm 15-20Nm Maximum 10Nm < 6Nm Press both up and down buttons at the same time for 3 seconds. Continue pressing the buttons until both columns are in lowest position. When finish reset, the control box makes a sound and the buttons can be released. Now the system is operational. REST THE DESK BEFORE USE WARNING Carefully arrange all the cables not to be damaged by tabletop screws. x8 x8 4B 4A 1050-1600mm

All rights reserved TEK05 - ASSEMBLY MANUAL x8 x4 x18 x2 x4