ZMODO IP Camera Operation & User’s Manual

of IP monitoring product is the integrated IP network camera which has been designed for network video surveillance. The series includes a network bullet camera, a network IR bullet camera, and a network dome camera. High performance, monolithic SOC chip is ...

1.1 Brief Introduction. ....................................................................................... 2 1.2 Main Features. .......................................................................................... 2 1.3 Installa ...

1.1 Brief Introduction This camera combines a traditional analog camera image sensor with a digital, IP based video stream. The software is built off of an efficient Linux system with all code stored in flash memory. This allows the camera to be small in size and extremely reliable. Figure 1-1 Network IP Camera Figure 1-2 Camera ...

During installation and operation, please pay attention to the following items: 1. When you received the package product, please check the equipment and accessories according to the packing list inside the shipping box. 2. Before installing the system, please carefully read this manual. 3. When you install the IP Camera, pleas ...

When using IE (Internet Explorer) to view the IP camera for the first time, you will have to set the security level for ActiveX controls. 2.1 Set Security Levels Open Internet Explorer, enter the IE Tools menu and go to Tools -->Internet Options --->Security Settings ---->Custom Level. Find the item titled “Download unsigned ActiveX Control ...

In order to login and view your camera from Internet Explorer, you will need to first find out the IP Address Segment, Default Gateway, and Subnet Mask of your computer. To find out the IP Address Segment, Default Gateway, and Subnet Mask, you will need to open the command prompt from a Windows PC that is connected to the same ...

of the camera to match your router settings: In the IP field, type in the same IP address that appeared as the IPv4 Address on your ipconfig results, but label the last three digits to a larger value such as 101. In the Gateway field, type in the same numbers that appeare ...

Double click on the IP Camera that you just saved networking settings on, and click on the "Wifi" tab. Select the check box to enable Wi-Fi. Next, manually set the IP Addr field, Subnet Mask field, and Gateway field to match the settings that appear in the Networking tab of the IPC Config menu. Click [Submit] then click [Refresh]. ...

and type your camera’s IP Address into the Internet Explorer browser as it appears in the IPCSearch program: The Default Login Values are the Following: UserName: admin Password: 111111 When prompted by Internet Explorer to install add-ons, click [Yes] to instal ...