THK KSF Instruction Manual

KSF-U：Open cover KSF-T ：Top cover THK Electrical Actuator Compact Series No.2050-4 (0) E www.thk.ru тел. +7(499) 703-39-86 [email protected] ...

i KSF 1. Introduction 1-1 1-1 Acknowledgment 1-1 1-2 About this manual 1-1 1-3 How to use this product 1-2 1-4 About product support 1-2 1-5 About related instruction manuals 1-2 1-6 Product and company information 1-2 2. Safety Precautions 2-1 2-1 Warning indications on safety 2-1 2-2 Safety precautions 2-1 2-3 Checking ...

ii KSF 8. Maintenance 8-1 8-1 Precautions to be observed for safe use 8-1 8-2 Precautions to be observed for prevention of product fault or fracture 8-1 8-3 Daily inspection 8-2 8-4 Periodical inspection 8-2 8-5 Lubrication 8-2 8-6 Method for supplying grease 8-3 8-7 How to replace the strip seal 8-10 8-8 Removing and mounti ...

This product is a long-stroke, high-speed, high acceleration/deceleration actuator. This product is designed and manufactured to be incorporated in devices with wide range of application including conveyance system, implementing equipment, automated as ...

z z This product must not be used for the devices or systems that are used under the situations that may be fatal to human life. z z If you consider using this product for special applications such as passenger movement vehicle, medical, aerospace, nuclear power, and electric power devices or systems, be su ...

2-2 Safety precautions This section describes important precautions that you must observe. „ „ General z z While this product is operating or operable, do not enter the working area of any moving part. Otherwise, it may cause you to touch the moving part and injure you. z z While the motor or sensor is energized, do not move o ...

„ „ General z z Do not stand on this product or the packaging box. Otherwise, it may cause fault or damage, or cause falling that could lead to injure. z z Do not impact this product. Otherwise, it may cause fault or damage, or injure you. z z Do not apply a load that exceeds the permissible level. Otherwise, it may cause faul ...

„ „ Installation and operation z z Firmly secure this product before operating it. Failure to do so may cause abnormal operation that could cause injury, fault or fracture. z z If anomaly occurs, immediately stop the machine. Failure to do so may cause abnormal operation that could cause injury, fault or fracture. z z Anti-rus ...

2. Safety Precautions 2-3 Checking the precautions/instruction labels This product is affixed with precautions/instruction labels. Identify them when unpacking the product. Fig.1 shows the affixing position. Caution – Getting caught Fig. 1 KSF precaution label affixing position (common for all models) 取扱説明書をお読 ...

Review the manual. MADE IN JAPAN THK Co.,LTD. ＳＥＲＩＡＬ　Ｎｏ．： ＴＹＰＥ　Ｎｏ．： 取扱説明書をお読みください。 取扱説明書をお読みください。 ＴＹＰＥ　Ｎｏ．： ＳＥＲＩＡＬ　Ｎｏ．： THK Co.,LTD. 取扱説明書をお読みください。 Review the manual. ...