Roland EV-1-WL Using Manual

unit and EV-1-WL Editor app wirelessly via Bluetooth, and how to operate the EV-1-WL Editor. 01 © 2021 Roland Corporation ...

(Android) 1. Power-on the EV-1-WL unit and the mobile device. 2. Make sure that the Bluetooth indicator on the EV-1-WL is blinking blue. If the indicator is blinking white or is lit up blue, operate the device as shown below to make the indicator blink blue. Blinking white Quickly press the EV-1-WL’s [Bluetooth] ...

The unit enters pairing mode, and the Bluetooth indicator rapidly blinks blue. * If the devices do not pair after one minute has passed, pairing mode is automatically canceled. 5. Launch the “EV-1-WL Editor” app that you installed on your mobile device. 6. Tap [Bluetooth MIDI DEVICE] that appears on the ...

device to return to the previous screen. 9. Verify that “EV-1-WL” is shown for “CONNECT” on the app. 10. Tap [OK] to start communication. ...

Check the following points. Items to Check Cause/Action Is Bluetooth activated on your mobile device? Make sure that Bluetooth has been activated on your mobile device. Is the Bluetooth indicator on the EV-1-WL is rapidly blinking blue? The EV-1-WL has not entered pairing mode. Blinking blue: Press the [Bluetooth] button to make it r ...

Cause/Action Is the unit paired with “EV-1-WL” or “EV-1-WL+”? When pairing, tap "EV-1-WL" in Bluetooth MIDI Device setting on the app, instead of Bluetooth setting on your mobile device. When you turn the Bluetooth switch of your mobile device on, “EV-1-WL” or “EV-1-WL+” might appear in the devices list, but you should not ta ...

and retry pairing Quit all apps that are running on your mobile device. 1. Tap the Android multitasking button and swipe up on the app screen. * The procedure for closing apps may differ depending on your mobile device. Use the method that’s appropriate for your device to close the apps. 2. Tap the gear icon for EV ...

EV-1-WL off and then on again 1. Turn off the mobile device and the EV-1-WL. 2. Wait for about 10 seconds and turn the power on again. 3. Start pairing again by following the steps in “Connecting the EV-1-WL to EV-1-WL Editor (Android)” (p. 2). * If you are still unable to connect with the app even after taking these ...

(iOS) 1. Power-on the EV-1-WL unit and the mobile device. 2. Make sure that the Bluetooth indicator on the EV-1-WL is blinking blue. If the indicator is blinking white or is lit up blue, operate the device as shown below to make the indicator blink blue. Blinking white Quickly press the EV-1-WL’s [Bluetooth] but ...

The unit enters pairing mode, and the Bluetooth indicator rapidly blinks blue. * If the devices do not pair after one minute has passed, pairing mode is automatically canceled. 5. Launch the “EV-1-WL Editor” app that you installed on your mobile device. 6. Tap [Bluetooth MIDI DEVICE] that appears on the ...