UseTECH FlowTimer+ Operating And Test Instructions

Innovative monitoring method for piping systems Operating and Test instructions ...

Tanzplatz 10 D- 55130 Mainz Phone: +49 (0) 6131 - 921325 Website: www. use-tech.com Document number FlowTimer+ Set_V4.2_Manual_EN_V4 Original operating instructions Date of issue 17.02.2021 Print date 22.02.2021 Copyright usetech GmbH This documentation including all its parts is protected by copyright. Any use or modification outside ...

01/21 FlowTimer+ Set 3 Table of contents Table of contents ......................................................................... 3 1 General ................................................................................. 5 1.1 Explanation of symbols ......................................................... 5 2 Technical data ......... ...

01/21 FlowTimer+ Set 4 8 Tests ................................................................................... 25 8.1 Checking the water heating system .................................... 25 8.2 Checking thetightness ......................................................... 26 8.3 Verification of the leakage ........................... ...

system. Keep these instructions in a place where they are easily accessible to every user and available again to every new owner of the system. NOTE The operating instructions contain important safety information! Failure to follow these instructions can ...

other documentation.  Action steps The defined sequence of action steps makes it easier for you to use the system correctly and safely.  Result Here you will find the result of a sequence of action steps described. ...

100 - 240 V~  Power consumption: Ø max. 6 Watt  Frequency: 50 - 60 Hz  Connection: Euro plug power supply 2.2 Fluidic data  Inlet pressure: 1 - 10 bar  Kv- value (valve): 8.0 / 24.0 m³/h (Std./XL version)  Gasket material: EPDM  Material: Eco ...

well as the operating conditions and permissible data in accordance with the data sheet so that the system functions properly and remains operational for a long time. In case of non- observance of these instructions as well as in case of unau ...

Unintended use in the sense of foreseeable misuse is considered to be:  It must be checked whether the existing installation allows FlowTimer+ to function smoothly at all, e.g. permanent consumers, etc.  The FlowTimer+ may only be operated with the components in the ...

The FlowTimer+ no longer shuts off if the system is not tight (observed over hours), but only displays this for convenience! The shut-off valve of the FlowTimer+ is open without power! Thus, the water supply can be comfortably restored only by switching off the power supply if requ ...