Uplift Desk KBT002 Instructions

Text of Uplift Desk KBT002 Instructions

© UPLIFT Desk • 1-800-349-3839 • [email protected] • www.upliftdesk.com

Step 1 Take the Track and place underneath your desktop, in order to figure out which size to use (11’’ or 21’’ Track) and where to place it. If there are pre- drilled holes in your desktop, line the track up with the holes. If there are not pre-driled holes, drill your own pilot holes using 1/8’’ diameter drill bit and drill 1/2’’ deep. Be sure to leave about

© UPLIFT Desk • 1-800-349-3839 • [email protected] • www.upliftdesk.com

Step 5 Finally, lower the tray, slide it back on the track and install the front bumper using three (3) Wood screws. Step 6 Attach the foam palm support onto the front of the Bamboo tray. Place the mousepad and cord catcher to the desired side. The non-slip Adhesive pads can be placed over the heads of the machine screws, or in any other position on the board. Use the Wire cli

Uplift Desk Indoor Furnishing Owners Instructions: