Rinstrum M4202 Quick Start Manual

Text of Rinstrum M4202 Quick Start Manual

1 x isolated duplex RS-232 with DTR

1 x isolated TX-only2 RS-485 Isolation >500V from indicator to module Power Supply Internal Baud rate1 2400, 4800, 9600, 19200, 38400, 57600 Parity bit1 None, Even, Odd Data bits1 7, 8 Stop Bits1 1, 2 DTR1,3 OFF, ON Termination1,4 OFF, ON (Internal) Note 1: Instrument may not support all options. Note 2: TX-only transmitter is always active. Note 3: RS-232 only. Note 4: RS-485 onl

The indicator should be switched OFF before installing or removing this device.

Modules are configured using the indicator setup. Setup can be done via the indicator keypad or the viewer program. An overview of the setup is given below; see the indicator Quick Start or Reference manuals for detailed setup information. The indicator provides configuration checking capabilities for the M4202. This is found in the H.WARE setup menu

Rinstrum Measuring Instruments Owners Instructions: