UIC MSR213V Series Simple Manual

2010-09-06 MSR213V SERIES Magnetic Stripe Card Reader USB Interface Thank you for purchasing the MSR213V series products. The MSR213V USB Magnetic Card Reader series is ideal for retail systems, time keeping systems, security systems and other card reader related systems. The MSR213V series are designed to offer the user a card reader solution that will complement many applications. Triple track of MSR213V is uniquely designed to read both credit cards and Driver Licenses (AAMVA and California standard). FEATURES z Light weight & compact size z Read magnetic stripe cards that conform to ISO and JIS standard z Read high and low coercivity magnetic stripes z Bi-directional card swipe and read capability z Single, dual and triple track decoding z LED and Buzzer indicators indicate card status z Baud rate: 9600 (fixed) z Firmware upgradeable CONFIGURATION z MSR213V-12 Dual track 1&2 z MSR213V-23 Dual track 2&3 z MSR213V-33 Triple track 1&2&3 Note: Optional configuration is available Pb AGENCY APPROVAL z Specifications for FCC Class B, CE Class B z BSMI (Bureau of Standards, Metrology and Inspection, Taiwan) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/ TV technician for help. You are cautioned that any change or modifications to the equipment not expressly approve by the party responsible for compliance could void your authority to operate such equipment. 警告使用者： 這是甲類的資訊產品，在居住的環境中使用時，可能會造成射頻干擾， 在這種情況下，使用者會被要求採取某些適當的對策。 WARRANTY This product is served under one-year warranty to the original purchaser. Within the warranty period, merchandise found to defective will be repaired or replaced. This warranty applies to the products only under the normal use of the original purchaser, and in no circumstances covers incidental or consequential damages though consumers’ misuse or modification of the products. PM084-S Revision A 1

2010-09-06 INSTALLATION 1. Insert USB connector to a free USB port on the PC system. 2. The first time Windows will prompt you to install a device driver for the device. 3. After the USB driver is installed, the LED of MSR213V will turn green indicating that the device is ready to use. For MSR213V USB driver, please contact UIC local representative or sales office. CARD READING To exhibit the card reading capabilities, any serial communication program that can transmit and receive serial data such as “Microsoft HyperTerminal” can be used. SPECIFICATIONS Recording Method Two-frequency coherent phase (F2F), compatible with ISO 7811 and AAMVA Swipe Speed 5 to 55 inch/sec (worst case with +/- 15% jitter card) Power Requirements +5VDC, +/-5% Communication Compatible with USB specification Revision 2.0 Operating Temperature -10°C to +55°C Operating Humidity 5% to 95% relative humidity Body Material ABS 94V-0 Cover and Cable Color IBM 43-4208 pearl white or black (optional) Magnetic Head Life Min. 1M swipes Dimensions 100L x 34W x 26H mm Weight Approx. 120g USB Identification Info. Vendor ID: 6352h/ Product ID: 213Dh Connector USB series “A” plugs DATA OUTPUT FORMAT PPC TK1 Prefix TK1 Data TK1 Suffix TPC PPC Separator TK2 Prefix TK2 Data TK2 Suffix TPC PPC Separator TK3 Prefix TK3 Data TK3 Suffix TPC NOTE: PPC is preceding protocol code and TPC is terminal protocol code. The prefix and suffix of each track and separator are optional. TKx Data: SS(optional) + Track Data + ES(optional) + LRC(optional) NOTICE: The issuer of this manual has made every effort to provide accurate information. The issuer should not be held liable for any technical and editorial omission or errors made herein; nor for incidental consequential damages resulting from the furnishing, performance or use of this material. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated without the prior written consent of the issuer. The information provided in this manual is subject to change without notice. PM084-S Revision A 2