Zoom 4360 Quick Start Manual

T R A N S M I T T E R a n d R E C E I V E R ...

Transmitter We recommend that you first connect the Receiver to your audio system, and then connect and use the Universal iHiFi Transmitter. Connecting the iHiFi Receiver 1111 Choose the audio system you want to use. The audio system must be a stereo, powered speakers, or other audio system that has a 3.5 mm (1/8 inch ...

else – because you'll need to press a button on your audio system to select that audio source when you want to use the iHiFi. 4444 Plug the other end(s) of the Receiver cable into the appropriate iHiFi Receiver jacks. 5555 Plug one end of the Receiver’s power cube cable into the Recei ...

The iHiFi Universal Transmitter plugs into the stereo headphone jack of an iPod, MP3 player, MP3-enabled phone, CD player, computer soundcard, satellite radio, or other audio device. You plug it into the jack directly or, if necessary, using the short extension cable included with your unit. When you’re not using the ...

compatible Bluetooth device, such as Bluetooth headphones. The Transmitter automatically “pairs” with an iHiFi Receiver. (The Transmitter can also pair with another Bluetooth device, such as Bluetooth headphones, if that device has 0000 or 1234 as its “PIN code” or “Pa ...

off. When using the Transmitter, you will get your best sound if you play your iPod or other audio device near maximum volume, and initially adjust your stereo’s volume accordingly. Then you can vary the volume using your audio device. Your Transmitter may have a sliding plast ...

computer, and plug the other end into the mini-USB jack of the Transmitter. The LED closest to the bottom of the Transmitter is On when the Transmitter is charging, and Off when the Transmitter is fully charged. You can use the Transmitter for transmitting audio during charging, if you’d l ...

on a clear, preferably flat area on the same side of your iPod or other device as the headphone jack. Remember, the further from the jack the better, but it can’t be more than 3.75 cm (1.5 inches) from the jack. Now peel off one piece of white Velcro from the other strip, and carefully push the Velcro side ( ...

Recomendamos que conectes primero el Receptor de tu sistema de audio y que luego conectes el Transmisor iHiFi. Como conectar el Receptor iHiFi 1111 Selecciona el sistema de audio que deseas usar. El sistema de audio deberá ser estéreo, con parlantes u otro sistema de audio que tenga una entrada de 3.5 mm (1/8 p ...

sonido cuando desees utilizar el iHiFi. 4444 Conecta el otro extremo del cable del Receptor en el enchufe adecuado del Receptor iHiFi. 5555 Conecta un extremo del cargador de corriente del Receptor en el enchufe del Receptor, y luego conectar el cargador de corriente en el tomacorrient ...