Zoom 56K Quick Start Manual

QUICK START This Quick Start describes external modem installation for personal computers using Windows 95, 98, Me, 2000, XP, and NT 4.0. Your modem also works with almost any computer or terminal with a serial (RS-232) port, including most Windows 3.x, Macintosh, and Linux computers. You should consult your full-length manual if you have ...

the Install Drivers screen appears, select the modem type you are installing. Click Next. Follow the prompts. Click Finish. Leave the CD in the drive, exit any running programs, and shut down your computer. Continue below. Connecting the Faxmodem 1 Make sure your computer is shut down. Locate the ...

your regular telephone to the back of the faxmodem, in the jack labeled PHONE. If your phone cord doesn’t have an RJ-11 plug, you may need an adapter for your cord or an RJ-11 phone cord for your phone. The faxmodem works with or without a telephone connected to it. 5 Connect the power cube. Plug ...

be displayed. Fill in the Location Information screen if it appears. Click Next. 7 At the Modem Properties box, select the newly installed modem and then click Properties. Set the Maximum speed to the highest speed available (probably 115,200). This sets the speed at which the computer communicates ...

Phone and Modem Options. Fill in the Location Information screen if it appears. XP: Open Start | Control Panel. Double-click Printers and other Hardware then Phone and Modem Options. Fill in the Location Information screen if it appears. 2 On the Phone and Modem Options screen, cl ...

Windows NT 4.0 Users: Skip to Step 4. 3 In one of the subsequent dialog boxes (depending on your operating system, Modems, Phone and Modem Options, or Modems Properties), select the modem you want to uninstall and click Remove. 4 Take the cover off the computer. Unplug any cords connected to the card. R ...

This equipment complies with 47CFR, Part 68 of the rules. The unit bears a label which contains, among other information, the certification number and Ringer Equivalence Number (REN). If requested, this information must be provided to the telephone company. This equipment uses the following standard jack ...

following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult ...