Zoom G1X Operation Manual

Reproduction of this manual, in whole or in part, by any means, is prohibited. SAFETY PRECAUTIONS / Usage Precautions ..................................2 Terms Used in This Manual.......... 3 Controls and Functions / Connections ................................4 Selecting a Patch ...........................6 Using the Tun ...

cautions for you to read so that accidents can be prevented. The meanings of these symbols are as follows: This symbol indicates explanations about extremely dangerous matters. If users ignore this symbol and handle the device the wrong way, serious injury or death co ...

Module selector RHYTHM [R/P] key Top Panel (G1X) Rear Panel (G1) Switches between play mode, edit mode, and rhythm mode. In edit mode, the knob selects the module for operation. Display Shows patch numbers, setting values, and other information for operating the G1/G1X. [OUTPUT/PHONES] jack Guitar Guitar amp ...

A0 HINT Turn power on Set the G1/G1X to play mode When using the G1/G1X on batteries, plug a shielded cable with mono phone plug into the [INPUT] jack on the rear panel of the G1/G1X. When using the G1/G1X with the AC adapter, plug the adapter into the outlet and plug the cable from the adapter into the [DC IN] jack on the G1/ ...

A8 BP MT Switch to bypass or mute Setting the G1/G1X to the bypass state In play mode or rhythm mode (→ p. 10), press both [W]/[Q] foot switches together briefly and release. Setting the G1/G1X to the mute state In play mode or rhythm mode (→ p. 10), press both [W]/[Q] foot switches together and hold for at least 1 second. T ...

Set the Module selector to the "RHYTHM" position. Start the rhythm function Select a rhythm pattern To start the rhythm function, press the RHYTHM [R/P] key. To switch rhythm patterns, press one of the [W]/[Q] foot switches in rhythm mode. The G1/G1X has 40 built-in rhythm patterns. For more information on pattern content ...

The patches of the G1/G1X can be freely edited by changing the effect parameter settings. Try editing the currently selected patch to create your own sound. C1 FD 25 Select the effect module/ parameter Turn the Module selector to select the effect module and parameter to edit. The available settings are listed below. (1) Patch ...

in another location to create a copy. A0 B0 In play mode or edit mode, press the [STORE] key. The bank and patch number are shown on the display as a flashing indication. NOTE Patches of banks in the preset ...

In normal operation, changing a patch in play mode of the G1/G1X will be active immediately. This means that the sound changes straight away when you make the selection. In some cases, such as when the new patch is at a memory location not adjacent to the current one, this method may not be ideal, because ...

Linking Effects T ...