TDK-Lambda Genesys Series Instruction Manual

G1.7 - 5kW in 1U 0-100V, 0-500A PARALLEL KIT INSTRUCTION MANUAL The manual covers kit options: G/P-4U-10-40V G/P-4U-60-100V G/P-4U-150-600V ...

The usage of parallel kit is according to customer's needs. 1.2 Advanced Parallel For parallel connection, refer to advanced parallel chapter in the series User Manual. 1.3 Product Safety Instructions Safety approvals are valid for single unit only. These are not valid for parallel kit assembly. When using a paralleling kit with a protective bracket, it must be correctly assembled, as described further in this document. 1.4 Assembly Instructions The supplied kit is used for standard and blank panel options. Follow the instructions carefully according t ...

1. Attach connection plates, one on each side of the power supplies, using 16 pan head screws, 16 helical spring-lock washers and 16 plain washers as illustrated in Figure 1. Figure 1: Four 10V‐40V Units Connection Plates 4U Assembly Connection Plate 4U  Plain Washer, No. 10, Stainless Steel Helical Spring‐Lock Washer, No. 10, Stainless Steel 10‐32 x 5/16 Pan Head Screw, Stainles ...

washers, 16 helical spring-lock washers and 16 hexagon nuts as illustrated in Figure 2. Figure 2: Four 10V‐40V Units Output Bus Bars Plates Assembly 3. Connect three paralleling cables from top unit M connector to bottom unit S connector as illustrated in Figure 3. Figure 3: Four 10V‐40V Units Paralleling Cable Connection Output Bus Bar Plate Paralleling Cable M10 x 25 Hexagon Bolt, Stainless Steel Tightening torque: 220‐265 Lbf‐inch (24.9‐29.9 Nm) Plain Washer, M10, Stainless Steel Helical Spring‐Lock Washer ...

1.4.2.1 Components List Image Component Quantity 10‐32 x 5/16 Pan Head Screw, Stainless Steel 16 Helical Spring‐Lock Washer, No. 10, Stainless Steel 16 Plain Washer, No. 10, Stainless Steel 16 Connection Plate 4U 2 Output Bus Bar Plate 2 Paralleling Cable 3 M8 x 25 Hexagon Bolt, Stainless Steel 12 Plain Washer, M8, Stainless Steel 24 Helical Spring‐Lock Washer, M8, Stainless Steel 12 Hexagon Nut, M8, Stainless Steel 12 ...

1. Attach connection plates, one on each side of the power supplies, using 16 pan head screws, 16 helical spring-lock washers and 16 plain washers as illustrated in Figure 4. Figure 4: Four 60V‐100V Units Connection Plates 4U Assembly 2. Attach output bus bars plates, one on each four terminals, using eight hexagon bolts, 16 plain washers, eight helical spring-lock washers and eight hexagon nuts as illustrated in Figure 5. Figure 5: Four 60V‐100V Units Output Bus Bars Plates Assembly Connection Plate 4U  Plain Washer, No. 10, Stainless Steel Helical Spring‐Lock Washer, No. 10, Stainless  ...

illustrated in Figure 6. Figure 6: Four 60V‐100V Units Paralleling Cable Connection 1.4.3 G/P-4U-150-600V - Assembly Instructions for four 150V-600V units in Parallel 1.4.3.1 Components List Image Component Quantity 10‐32 x 5/16 Pan Head Screw, Stainless Steel 16 Helical Spring‐Lock Washer, No. 10, Stainless Steel 16 Plain Washer, No. 10, Stainless Steel 16 Connection Plate 4U 2 Paralleling Cable 3 Paralleling Cable ...

1. Attach connection plates, one on each side of the power supplies, using 16 pan head screws, 16 helical spring-lock washers and 16 plain washers as illustrated in Figure 7. Figure 7: Four 150V‐600V Units Connection Plates 4U Assembly 2. Connect three paralleling cables from top unit M connector to bottom unit S connector as illustrated in Figure 8. Figure 8: Four 150V‐600V Units Paralleling Cable Connection Connection Plate 4U  Plain Washer, No. 10, Stainless Steel Helical Spring‐Lock Washer, No. 10, Stainless Steel 10‐32 x 5/16 Pan Head Screw, Stainless Steel Tightening torque ...