Renesas RA Series Quick Start Manual

Renesas RA Family RA2 Series User’s Manual www.renesas.com All information contained in these materials, including products and product specifications, represents information on the product at the time of publication and is subject to change by Renesas Electronics Corp. without notice. Please review the latest information published by Re ...

Notice 1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation or any other use of the circuits, software, and information ...

By using this EK-RA2A1, the User accepts the following terms, which are in addition to, and control in the event of disagreement, with Renesas’ General Terms and Conditions available at https://www.renesas.com/en-us/legal/disclaimer.html. The EK-RA2A1 is not guaranteed to be error free, and the entire risk as to the results and ...

R20QS0010EU0100 Rev.1.00 Page 4 of 20 Sep.17.19 Renesas RA Family EK-RA2A1 Contents 1. Introduction .............................................................................................................................. 6 1.1 Assumptions and Advisory Notes ............................................................................. ...

EK-RA2A1 – Quick Start Guide R20QS0010EU0100 Rev.1.00 Page 5 of 20 Sep.17.19 Figure 13. Clicking Next to Import Existing Projects into the Workspace ..................................................... 14 Figure 14. Selecting the Root Directory ......................................................................................... ...

EK-RA2A1 – Quick Start Guide R20QS0010EU0100 Rev.1.00 Page 6 of 20 Sep.17.19 1. Introduction This Quick Start Guide (QSG) provides: • An overview of the Quick Start example project that the EK-RA2A1 board comes pre-programmed with. • Instructions for running the Quick Start example project. • Instructions for importing, modifying, ...

EK-RA2A1 – Quick Start Guide R20QS0010EU0100 Rev.1.00 Page 7 of 20 Sep.17.19 3. Overview of the Quick Start Example Project The Quick Start example project allows the user to change the frequency of the on-board LED, LED1, using the User Button (USER BTN). The supported frequencies are 1 Hz, 5 Hz, and 10 Hz. When the board running the Qu ...

EK-RA2A1 – Quick Start Guide R20QS0010EU0100 Rev.1.00 Page 8 of 20 Sep.17.19 4. Running the Quick Start Example Project This section lists the requirements and instructions to power up the EK-RA2A1 board and run the Quick Start example project. Hardware Requirements • EK-RA2A1 board • Two Micro USB device cables • Jumper Note: EK-R ...

EK-RA2A1 – Quick Start Guide R20QS0010EU0100 Rev.1.00 Page 9 of 20 Sep.17.19 4.2 Running the Quick Start Example Project To run the Quick Start Example Project, use the following instructions: 1. On power up or RESET, the user LED (LED1) starts blinking red at 1 Hz. 2. Press the user button (S1, USER BTN) on the EK-RA2A1 board to change ...

EK-RA2A1 – Quick Start Guide R20QS0010EU0100 Rev.1.00 Page 10 of 20 Sep.17.19 4. Open Tera Term, select Serial and COMxx: USB Serial Device (COMxx) and click OK. Figure 5. Selecting the Serial Port on Tera Term 5. Press Enter key. The welcome message will be displayed. Figure 6. Welcome Message ...