multicomp pro MP780648 Quick Start Manual

MP780648 INTRODUCTION This device is a non-contact (infrared) thermometer. Simply aim the thermometer at the target and press the measurement button to display the surface temperature. The distance to target ratio is 1:1 therefore the thermometer should be positioned as close to the target as possible. ...

⚫ Unique flat surface, modern housing design ⚫ Automatic data hold ⚫ Automatic power off ⚫ oC / oF modes ⚫ Resolution 0.1ºC (0.1ºF) WIDE RANGE APPLICATION Food preparation, safety inspectors, plastic moulding, asphalt, marine and screen printing, measure ink and dryer temperature, HVAC/R, d ...

2. Measurement button 3. LCD Display 4. IR sensor 5. C/F button BATTERY REPLACEMENT As battery power is not sufficient, LCD will display “ ” replace with 2 x LR44 coin cell batteries. Operation: unscrew the battery cover and change the batteries, observing the correct polarity. Incorrect polarity could cause damage to the t ...

The sensor lens is the most delicate part of the thermometer and should be kept clean at all times. Care should be taken when cleaning the lens using only a soft cloth or cotton swab with water or medical alcohol, allowing the lens to fully dry before using the thermometer. Do not use abrasives or solvents on this thermometer. Do not s ...