Redgum Black Series Quick Start Manual

Minimum Conditions required: Amplifier StandBy power must be 'On' (i.e. the amplifier has completed its Self-Test Boot-Up sequence after power was turned on at the wall socket. Once in StandBy, a red LED can be seen within the logo on the front panel.) Whilst testing the battery, the amplifier may be 'On' (playing) or 'Off'/in StandBy (awaiting the 'On' command from the Remote Control by the 'Amp Power' ...

please follow these instructions to go down into the Menu System 1. Via wall socket, turn off mains power to amplifier for at least 20 seconds. 2. Remove from room all other Infra Red transmitting systems, mobile phones, IR extender systems or other remote controls that could be actioned by other family members. (This extends to bright sunlight or fluorescent lights directly shining on IR ...

Use Right or Left Balance Buttons to select items. (Up Volume button to Exit from the menu system.) ...

● CD1 – Original REDGUM remote control (Factory Default) (1 Beep) ● AV1 – TouchScreen remote (supplied with updated REDGUM codes) (2 Beeps) ● DVD – Unused (3 Beeps) ● CD2 – Unused (4 Beeps) ● AV2 – Level 2 Menu System (To confirm current settings, press Bal button.) ...

● CD1 – Automatically tend to correct balance as volume controls move. Hardly ever need to push Bal button (Factory Default) (1 Beep) ● AV1 – Attempt to maintain customer's intentionally set balance differential by driving both controls in proportion to starting position (2 Beeps) ● DVD – Unused (3 Beeps) ● CD2 – Unused (4 Beeps) ● AV2 – Unused (5 Beeps) (To confirm current settings, press Bal button.) ...

(P-O S-T) (Factory Default) (1 Beep) ● AV1 – “Power-Up” Sounds only; no P-O S-T. ● (2 Beeps) ● DVD – P-O S-T only; no “Power-Up” Sounds (3 Beeps) ● CD2 – No “Power-Up” Sounds; no P-O S-T (4 Beeps) ● AV2 – Unused (5 Beeps) (To confirm current settings, press Bal button.) ...

● CD1 – 'Memory Select' - Select immediately, then change to last remembered volume level for selected input (Factory Default) (1 Beep) ● AV1 – 'Professional Fade' - Volume fades out, selector changes to new input, volume rises up to last remembered volume level for this input (2 Beeps) ● DVD – 'Basic Select' - Select immediately – no volume changes (3 Beeps) ● CD2 – 'Silent Change' - Unselect input, change to n ...

movements) (Factory Default) (1 Beep) ● AV1 – 'Variable Mute' - Operate Mute, Adjust volume control to last used Mute Volume on this input – Unmute – restores volume then releases Mute (2 Beeps) ● DVD – Unused (3 Beeps) ● CD2 – Unused (4 Beeps) ● AV2 – Unused (5 Beeps) (To confirm current settings, press Bal button.) ...

Press Magic button to reset all options to Factory Default (musical tone - “Baa Baa Black Sheep” - confirms when reset) and/or (Up Volume button to Exit from of the menu system.) Other Level 2 Menu options - currently all unused. ...