Lucid ENLITE Manual 

Text of Lucid ENLITE Manual 

The hearing amplifier is a personal sound

amplifier that automatically enhances soft sounds. Loud sounds pass through as though nothing is in the ears. The hearing amplifier provides the highest fidelity sound amplification available at any cost. The sound quality of hearing amplifier devices is superior to that of all known custom-fitted devices, and is available without medical referral or prescription. The circuitry in hearing ampl

Etymotic’s hearing amplifier devices have

high-frequency emphasis for soft sounds, so the faint sounds of speech can be heard more easily – especially if the speaker is farther away than desirable or speaks very softly. The most common example is someone asking a question from another room. Soft speech can also be heard in a house of worship, classroom, courtroom, lecture hall, theatre, or TV dialog. For many users, hearing amplifier d

The battery must be inserted correctly

or the hearing amplifier will not work. 1. The battery compartment is located on the underside of the hearing amplifier. 2. Open the battery door. 3. Remove the yellow tab from the battery. 4. Insert the battery with the the flat side facing up. 5. Do not force the battery into the door. Battery Compartment #10 Battery Inserted Battery Door Note: The door will not close if the battery is not

LOW BATTERY WARNING

6 Low-Battery Warning A feature called LOBAT™ alerts you when the battery is at the end of its life. • A slow, quiet ticking sound gradually becomes faster and louder, like the sound of a motorboat. • After the warning sound first becomes audible, it may be a few hours before the battery goes dead. • Hearing amplifier performance will not change while LOBAT is sounding. Estimated Battery Life: 9 days continuous operation

• Make sure the eartip is clean.

• Pull the ear up and out while inserting. • Twist and push gently until the eartip seals in the ear canal. • When using 3-flange eartips, moistening may ease insertion. • When using foam eartips, roll down or compress the foam eartip before inserting. Hold the eartip in place for about 5 seconds while foam expands to create a tight seal in the ear canal. • When using glider earti

IMPORTANCE OF A DEEP SEAL

10 Note: Hearing amplifier devices come with a large selection of eartips, including two sizes of 3-flange eartips with long stems. Depending on your ear geometry, the longer stems may allow the deepest seal. A deep eartip seal ensures the best performance and prevents the “hollow voice” sound, called the occlusion effect. • The occlusion effect is caused by sound transmission into the ear from vibration of the ear cana

GENERAL PRODUCT CARE

Cleaning Tool 12 Simple cleaning with the tool provided will keep the eartip clean and the hearing amplifier working properly. • Use the cleaning tool to pick out or brush off debris. • 3-flange eartips can be removed and cleaned in mild detergent. Dry eartips thoroughly before reattaching. • All eartips need to be replaced regularly. With regular use of hearing amplifier devices, 3-flange eartips should be replaced ever

Lucid Hearing Aid Owners Instructions: