LOWES Crescent Hill Assembly Instructions
Text of LOWES Crescent Hill Assembly Instructions
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
Home Styles Consumer Assistance: www.homestyles-furniture.com,
[email protected], 88
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
Home Styles Consumer Assistance: www.homestyles-furniture.com,
[email protected], 88
Assembly Instructions 3
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the bolts until each part is properly assembled.
* Use a soft cloth between these parts and the fl oor.
* After assembly item must be level to work properly. Use the included adjustable levelers to level.
STEP 1
Place Base (L) upside down on
a soft cloth then attach Legs (M),
(N), (O) and (P) to
Assembly Instructions 4
B
C
D
F
F
A
H
H
I
I
I
I
G
E
Head Cap Bolt (short)
Cam Lock
Cam Lock
Adjustable Pin
STEP 3
Attach Side Panels (B) and (C) with
Head Cap Bolts (short).
STEP 4
Turn the unit over to its’ upright
position.
Attach Middle Panels (D) and (E) to
the unit with Cam Locks.
(See Figure 4)
Slide Back Panels (F) and (G) into
position.
STEP 5
Attach Top (A) to the unit with Cam Locks.
Insert Adjustable Pins into side panels and
middle panels at
Assembly Instructions 5
STEP 6
Attach Pull Handles to Doors (J)
and (K) with Machine Screws.
(See Figure 5)
Attach Doors (J) and (K) to unit
by sliding the door life hinges
into the side panel lift hinges.
(See Figure 6)
Level the unit by adjusting the adjustable
levelers on the bottom of the legs.
(See Figure 7)
STEP 7
Insert Wood Screws into the
pre-drilled holes in the back
panel.
J
K
Figure 5
Figure 6
Figure 7
Wood Screw
Note : Please make sure unit
is