Overland Storage ARCvault Series Remove & Replace Instructions

07/2008 ©2008 Overland Storage, Inc. Page 1 of 2 This document describes how to remove and replace a SAS Tape Drive assembly in an ARCvault loader or library. Unpacking Carefully unpack and verify that you have all the parts: • SAS Tape Drive assembly (half-height) • Four M4x6mm screws • These remove & replace instructions WAR ...

07/2008 ©2008 Overland Storage, Inc. Page 2 of 2 1. Remove the four screws that secure the half-height drive to the guides (Figure 3). 2. Slide the old drive out of the guides leaving the other drive or air baffle in place. If necessary, loosen the screws on the other drive or air baffle. Retighten them when done. 3. Slide the new d ...