Lit Lightz Flex Series Installation Manual

STEP 1: ​Inspect the kit to ensure all the contents were included. STEP 2: TESTING THE KIT With an external 12V power source, connect the red wire (power) and black wire (ground) to the power source's appropriate spots. Thoroughly test and make sure all LED strips are working correctly. STEP 3: DETERMINING MOUNTING LOCATIONS Locate the areas on the vehicle you will be mounting the LED strips. On ...

will see four open sections on the cable tie mount, grab a zip tie, and run it through one of the available areas (picture below for reference). Carefully tightened the strip to the cable tie mount without applying too much pressure on the LED strip. Nylon cable tie with a zip tie OPTION 2 - USING THE 3M TAPE ON THE BACK OF THE STRIPS You will mount the LED ...

the warranty. 2. Adding your own wires to the Bluetooth controller and power converter will void the warranty. 3. If you have a degrading/weak battery, please replace your battery before installing your kit. DISCLAIMER Please refer to local and state laws for the proper use of this product. Improper installation of electrical products such as lighting ...