modway MOD-6275 Quick Start Manual

Text of modway MOD-6275 Quick Start Manual

Thank you for purchasing the MODWAY BED!

Before you start, here are some helpful advice: 1. We suggest you spend a short time reading through this leaflet and then follow the simple step instructions. 3. Please do not use any tools other than those provided or recommended in these instructions. 4. Please do not throw away any of the packaging or the instruction until you have checked all the components and hardware and the furniture is fully assembled. Ple

02 of 05

STEP 2 2.1 Fasten Center Rail Leg (E) to Center Rail (D) attach by screwing the protruding nut into the corresponding holes. A B D E 2. WOOD SCREW M4 x 25mm x 12pcs MOD - 6275 H 5 6 4 9 2 STEP 1.1 STEP 1.2 4. JCBB BOLT M8 x 30mm x 4pcs 5. M8 FLAT WASHER x 4pcs 6. M8 SPRING WASHER x 4pcs 9. M5 ALLEN KEY (BALL SHAPE) x 1pcs Screw Driver 1.1 Insert and secure the Bed Leg (H) to the Headboard (A) and Footboard (B) using hardware parts Woo

03 of 05

STEP 4 A C 4.1 Attach the Side Rails (C) to the Headboard (A) & Footboard (B) using hardware part Allen Key (9). 3.1 Loosen the pre-inserted bolt on the Headboard (A) & Footboard (B) using hardware part Allen Key (9). 9 A B C A B MOD - 6275 9 9. M5 ALLEN KEY (BALL SHAPE) x 1pcs 9. M5 ALLEN KEY (BALL SHAPE) x 1pcs

04 of 05

3. WOOD SCREW M3.5 x 16mm x 8pcs 1. WOOD SCREW M4 x 20mm x 2pcs D A F C 3 x 2 D A x 2 1 6.1 Locate Center Rail (D) into the corresponding brackets inside of Headboard (A) and footboard (B) using hardware parts Wood Screw (1) . 5.1 Locate Center Rail (D) into the corresponding brackets inside of Headboard (A) and Footboard (B). 5.2 Insert and secure the Center Rail Support (F) to the Center Rail (D) & Side Rail (C) using hardware part

05 of 05

STEP 7 Assembly is complete. The bed is ready to use now! NOTE: Hardware may loosen over time. Periodically check that all connections are tight. STEP 8 8.1 Carefully position the assembled bed to the desired location by four adults. 7.1 Insert the Slats (G) into the end slat cap (7) & (8) and fix it to the corresponding holes on the Side Rail (C) . 7. BED SLAT SIDE FITTER x 26pcs 8. BED SLAT CENTER FITTER x 13pcs Palm Palm G 7 G G 8 STEP 7.2 STEP

modway Indoor Furnishing Owners Instructions: