modway EEI –2787 Manual 

Text of modway EEI –2787 Manual 

Customer Service 908-368-1025︱www.modwayfurniture.com Page 1 of 5

EEI –2787 DESK Thank you for purchasing the MODWAY DESK! Before you start, here is some helpful advice: 1.We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions. 2.Owing to the size and weight of the desk, we recommend that it is assembled by two

Customer Service 908-368-1025︱www.modwayfurniture.com Page 2 of 5

EEI –2787 DESK STEP 1: STEP 2: Put Cube Left (5), Cube Right (6), Cube Top (7), and Cube Bottom (8) together on a carpeted or padded surface as shown. Attach them by using 6 pieces of Small Bolt (B), 6 pieces of Small Nut (C) , and 4 pieces of Short Screw (E). Hold Small Nut (C) by hand, then use Phillips Head S

Customer Service 908-368-1025︱www.modwayfurniture.com Page 3 of 5

EEI –2787 DESK STEP 3: STEP 4: Hardware & Tools required Hardware & Tools required Put 2 pieces of Leg (3) and 1 piece of Stretcher (4) together as shown. Insert 4 pieces of Bolt (A) into the pre-drilled holes on the Legs (3) through the pre-drilled holes on Stretcher (4). Repeat the same steps for the remaining

Customer Service 908-368-1025︱www.modwayfurniture.com Page 4 of 5

EEI –2787 DESK STEP 5: STEP 6: Hardware & Tools required Hardware & Tools required Ax8 Gx1 Insert 4 pieces of Adjustable Leveler (F) into the bottom of assembled Legs (3) as shown. Secure Leveler (F) by hand. 5 Fx4 Insert the assembled Legs (3) and Stretcher (4) to the assembled Table Top (1), Rails (2), and Cub

Customer Service 908-368-1025︱www.modwayfurniture.com Page 5 of 5

EEI –2787 DESK STEP 7: Carefully turn over the assembled desk. If leveling is needed, turn Leveler (F) clockwise to down and counterclockwise to raise. Assembly is complete. Your desk is ready to be used now!

modway Indoor Furnishing Owners Instructions: