Hytera PNC380 Manual 

Hytera Communications Corporation Limited Hytera Tower, Hi-Tech Industrial Park North, 9108# Beihuan Road, Nanshan District, Shenzhen, People's Republic of China ...

2.1 Installing the SIM Card and SD Card 1. Slide the battery latch to and remove the battery cover. 2. Remove the battery. 3. Open the card slot cover. 4. Put the card into corresponding slot. 2.2 Attaching the Battery Use the approved battery to avoid the risk of explosion. Dispose of the used battery according to “Precautions for Dis ...

Use the approved charger to charge the battery. Read the Safety Information Booklet before charging. The remaining lithium-ion battery power is limited to 30% pursuant to the new lithium battery shipment regulation approved by International Air Transport Association (IATA). To charge the battery, connect the terminal to the ...

Open the cover of the audio accessory connector and insert the audio accessory into the connector. To ensure optimum waterproof and dustproof performance, close the cover after removing the audio accessory. ...

To power on the terminal, press and hold the key. To power off the terminal, press and hold the key, and select Power Off. 3.2 Adjusting the Volume To increase the volume, press + key. To decrease the volume, press – key. 3.3 Turning the Screen On or Off To turn off the screen when it is on, press the SK k ...

You can connect to the Internet by using the cellular network or WLAN network. To connect to the cellular network, install the SIM card and activate the cellular data service. To connect to the WLAN network, do as follows: 1. Go to to select WLAN to enable the WLAN network. 2. Choose one of the listed networks. If a password is ...

do not listen at high audio volume for long periods of time 4. PoC Service Push-to-talk over Cellular (PoC) provides direct one-to-one and one-to-many voice communication services over the cellular network. This service is available only when you have installed the PoC application on the terminal. You can access PoC menu to ...

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party respo ...

to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,including interference that may cause undesired operation of the device. Le onjunc areil est conforme ...

de puissance certifié le plus élevé dans toutes les bandes de fréquences testées, bien que le SAR soit déterminé au niveau de puissance certifié le plus élevé, le niveau SAR réel du téléphone penda ...