Hyperkin M07409 Quick Start Manual

Text of Hyperkin M07409 Quick Start Manual

Cable Status Guide

The colored LED INDICATOR LIGHTS on your cable tells you your cable's status. The BLUE light indicates that the cable is transmitting signal. The RED light indicates the cable is powered ON. Both Blue and Red Light On = Cable is working Red Light Only = Sleep Mode If your cable has no signal for 10 minutes, it will switch to Sleep Mode. Note: If your cable is not functioning correctly, an additional power source might be required. Connec

sélectionnée, une fenêtre de notifcation apparaîtra sur l'écran de votre appareil vous

demandant si vous souhaitez affcher la sortie vidéo sur un appareil connecté. Sélectionnez "Oui". L'affchage vidéo apparaît maintenant sur votre écran HDTV. 5. Une fois la lecture terminée, débranchez le câble HDTV. Une fois débranchée, l'image reviendra à l'écran de votre ordinateur de poche. Remarque: Vous devrez confgurer les paramèt

Guía de Estado del Cable

Las luces indicadoras LED de colores de tu cable te indican el estado del mismo. La luz AZUL indica que el cable está transmitiendo señal. La luz ROJA indica que el cable está encendido. Tanto la luz azul como la luz roja encendidas = El cable está funcionando Sólo la luz roja = Modo de sueño Si su cable no tiene señal durante 10 minutos, cambiará al modo de reposo. Nota: Si tu cable no funciona correctamente, es posible q

Statement of Compliance with EU Directive

Hyperkin Inc., located at 1939 West Mission Blvd, Pomona, CA 91766, declares under our sole responsibility that the product, HDTV Cable for PSP® 2000 and 3000 models, is in compliance with the essential requirements and other relevant provisions of Low Voltage Directive (LVD) 2014/35/EU, EMC Directive 2014/30/EU, and RoHS Directive 2011/65/EU and carries the CE marking. The full Declaration of Conformity can be re

Hyperkin Cables and connectors Owners Instructions: