Mocka Denham Assembly Instructions Manual

Text of Mocka Denham Assembly Instructions Manual

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558

1 bolt x30 A B C D E F G H J K L O I Hardware Supplied dowel x36 screw x6 P screw x36 locking nut x30 screw x18 handle x3 hinge x6 M N bolt x8 plastic glide x4 adjuster x1 bracket x4 bolt x16 wedge x12 screw x12 Allen Key x1 Wall Strap x2 washer Z Y wall anchor x1 X safety strap x1 W V screw x1 wall screw x1 WARNING: Any furniture that is not
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558 2 Panel layout 1 C Insert 8x bolts (C) into panel [1] and 2x bolts (C) into panel [13]. Tighten with a screwdriver. C C C C C C C C C X4 C 1 3 3 4 4 4 5 5 9 10 11 12 13 40 41 5 6 6 7 7 8 8 8 2 1 13
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558 3 2 3 Insert 8x bolts (C) into panel [2]. Turn it over insert 2x bolts (C) into panel [2].Tighten with a screwdriver. Insert 8x bolts (C) into panel [12]. Turn it over insert 2x bolts (C) into panel [12].Tighten with a screwdriver. C C C C C C C C C C C C C C C C C C C C FLIP FLIP 2 2 12 12
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558 4 5 4 Slide panel [5] down along the grooves between the panels [3] and [6] to form the back of the unit as shown. Attach panels [3], [6], [4] and [8] to panel [1] with 6x dowels (A) and secure with 8x locking nuts (D). Tighten with a screwdriver. A A D D D D A A A A D D D D 1 3 3 6 6 5 8 4
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558 5 6 7 Attach panels [4], [9], [10] and [8] to panel [2] with 6x dowels (A) and secure with 8x locking nuts (D). Tighten with a screwdriver. Attach panel [2] to panels [3], [6], [4] and [8] with 6x dowels (A) secure with 2x locking nuts (D) and 6x screws (B). Tighten with a screwdriver. D D A A A B B B B B B B D D D D D D D A A A A A A 3 6 2 4 8 2 4 8 9 1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558 6 8 9 Assembly Instructions A A A A A A D D B B B B B B 9 9 4 12 8 10 10 5 Slide panel [5] down along the grooves between the panels [9] and [10] to form the back of the unit as shown. Attach panel [12] to panels [8], [4], [9] and [10] with 6x dowels (A) and secure with 6x screws (B) and 2x locking nuts (D). Tighten with a screwdriver.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558 7 11 10 A A A A A A D D D D D D D 12 3 6 4 8 3 6 5 Slide panel [5] down along the grooves between the panels [3] and [6] to form the back of the unit as shown. Attach panels [3], [6], [4] and [8] to panel [12] with 6x dowels (A) and secure with 8x locking nuts (D). Tighten with a screwdriver.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558 8 13 12 Attach 4x brackets (J) to legs [40] using 8x bolts (I). Tighten with a screwdriver. Attach legs [40] to panel [13] using 16x bolt (L) as shown. Tighten with an Allen key (F). Turn 1x support leg [41] into panel [13] until firm. Insert the adjuster (M) into the middle support leg. Attach 4 x plastic glide (K) to legs [40] as shown. A A A B B B B B

Mocka Indoor Furnishing Owners Instructions: