Mocka Charli Bedside Table Assembly Instructions Manual

Text of Mocka Charli Bedside Table Assembly Instructions Manual

WARNING: Any furniture that is not anchored to a wall has the potential to tip

over in certain circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake. Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device provided should fit most wall types, but please no

Insert 4x bolts (A) into panel [1]. Tighten with a screwdriver.

Charli Bedside Table 2 mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558 Assembly Instructions Attach 3x CL runner track (I) to panel [2] and secure with 9x small screws (F). Attach 3x CR runner track (J) to panel [3] and secure with 9x small screws (F). Tighten with a screwdriver. 3 2 J F F F I CL F J CR 1 A I

Attach panels [2] and [3] to panel [1] with 4x dowels (C) and

secure with 4x locking nuts (B). Tighten with a screwdriver. 3 4 Slide panels [5] down along the grooves between the panels [2], [3] and [1] to form the back of the unit as shown. Attach panel [4] to the unit with 4x dowels (C) and secure with 4x long screws (P). Tighten with a screwdriver. Charli Bedside Table 3 mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558 Assembly Instr

Attach 1x bracket (E) to each panel [6] with 2x screws (D). Attach 4x

brackets (E) to panel [4] with 16x screws (M). Tighten with a screwdriver. 5 Screw on 4x legs [6] to the brackets on panel [4] until secure. Apply 4 x felt pads (O) to legs [6] as shown. Charli Bedside Table Assembly Instructions 4 mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558 6 4 E 6 D E O 6 6 6 M M E

Slide the completed drawers into the unit, ensuring they slide smoothly

and easily. A Jolt Wardrobe 7 Insert 4x bolt (A) into panel [7]. Tighten with a screwdriver. Charli Bedside Table Assembly Instructions 5 8 Attach panels [9] and [10] to panel [7] with 4x locking nuts (B). Tighten with a screwdriver. Drawers x3 Drawers x3 B 10 B 7 7 9 mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

Slide panel [11] along the grooves between the side panels [9] and

[10] to form the base of the drawer. Charli Bedside Table Assembly Instructions 6 10 Attach panels [9], [10] and [8] with 4x screws (D). Tighten with a screwdriver. Drawers x3 Drawers x3 11 D 10 10 9 7 8 9 mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

Attach DL runner (K) to panel [9] and DR runner (L) to panel [10] with

4x small screws (F). Tighten with a screwdriver. Charli Bedside Table Assembly Instructions 7 12 Loosen the screw on the back of the handle. Attach 1x handle (N) to panel [7] with screw as shown. Complete the other two drawers. Drawers x3 F F K L 10 9 7 N Drawers x3 N N N N N mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

Insert the assembled drawers into the corresponding compartments

as shown. Ensure the drawers slide easily along the rails. Charli Bedside Table Assembly Instructions 8 14 Attach 4x wedges (G) into the corners of the back of the unit and secure with 4x screws (H). Tighten with a screwdriver. G H G H 5 mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

Mocka Indoor Furnishing Owners Instructions: