Mobeye CM2500 Portal User Manual

message) and 30 days. The default test interval is set to "7" (weekly test message). When using your own SIM card: The Mobeye Panic Button can send regular test SMS messages (keep alive) to the first phone number (TEL1), to ensure the proper functioning of the unit. The test message function is only active if the unit is armed. The timing of the test message is determined by the time of programming. The test time can also be programmed. The interval between the test messages can be set between 0 days (no test message) ...

6 2. Standard behaviour 7 2.1 Mobeye Panic Button with Mobeye SIM and Internet Portal 7 2.2 Mobeye Panic Button with own SIM card 8 3. Getting started 9 3.1 Insert the SIM card 9 3.2 Insert the batteries 10 3.3 Connect an external power supply (optionally) 10 3.4 Connect an external emergency button (optionally) 11 4. Programming when using the Mobeye SIM and portal 12 4.1 Sign up in the Mobeye Internet Portal 12 4.2 Register the Mobeye SIM card 12 4.3 Enter the program mode 13 4.4 Activate the device in the portal 13 4.5 Configuration and synchronisation 14 4. ...

6 2. Standard behaviour 7 2.1 Mobeye Panic Button with Mobeye SIM and Internet Portal 7 2.2 Mobeye Panic Button with own SIM card 8 3. Getting started 9 3.1 Insert the SIM card 9 3.2 Insert the batteries 10 3.3 Connect an external power supply (optionally) 10 3.4 Connect an external emergency button (optionally) 11 4. Programming when using the Mobeye SIM and portal 12 4.1 Sign up in the Mobeye Internet Portal 12 4.2 Register the Mobeye SIM card 12 4.3 Enter the program mode 13 4.4 Activate the device in the portal 13 4.5 Configuration and synchronisation 14 4. ...

on the "edit" icon and type in the security code (factory setting is "1111"). See chapter 5 for the description per setting. After saving the new settings, they must be retrieved by the device (synchronized). See 4.5 for more information about synchronizing. The device data contain the name and location of the device and can be changed here. These texts are mentioned in every text message and e-mail message to indicate the device. A free text is available as an internal comment field. This i ...

It is possible to connect external panic buttons to the inputs. As soon as the external button is pressed for at least one second, the behaviour will be similar as when the on/off button was pressed. Insert the 2 wires of an external sensor through the hole in the enclosure and insert them in the two connectors of input 1 (press on the green pins for connecting the wires). It does not matter which wire is connected to which connector. A second button can be connected to input 2. As default the inputs are programmed as Normally Open (NO) ...

If the Mobeye Panic Button is powered externally and the power fails, it is able to make phone calls and/or send textual messages. There are three configuration options: Alert, Alarm, Off. Mobeye SIM/Portal Own SIM Alert Message via portal SMS to TEL1 Alarm Call to TEL1···TEL5 and message via portal SMS + call to TEL1···TEL5 Off No message No message The default setting for the ‘power failure message’ is set to “ALERT”. 5.9 POWER FAILURE DELAY TIME If the Mobeye Panic Button is powered externally and the power fails it can notify the contact person(s) ...