OBSIDIAN CONTROL SYSTEMS Netron RDM10 Installation Manual

instructions herein are subject to change without notice. Obsidian Control Systems logo and identifying product names and numbers herein are trademarks of ADJ PRODUCTS LLC. Copyright protection claimed includes all forms and matters of copyrightable materi ...

GENERAL INFORMATION 4 LIMITED WARRANTY 5 SAFETY GUIDELINES 6 OVERVIEW 7 INSTALLATION 8 CONNECTIONS 9 MAINTENANCE 12 SPECIFICATIONS 13 DIMENSIONS 14 ...

INTRODUCTION Please read and understand the instructions in this manual carefully and thoroughly before attempting to operate this device. These instructions contain important safety and use information. UNPACKING Every device has been thoroughly tested and has been shipped in perfect operating condition. Carefully check ...

1. Obsidian Control Systems hereby warrants, to the original purchaser, Obsidian Control Systems products to be free of manufacturing defects in material and workmanship for a period of two years (730 days). 2. For warranty service, send the product only to the Obsidian Control Systems service center. All shipping charges mus ...

This device is a sophisticated piece of electronic equipment. To guarantee a smooth operation, it is important to follow all instructions and guidelines in this manual. OBSIDIAN CONTROL SYSTEMS is not responsible for injury and/or damages resulting from the misuse of this device due to the disregard of the information print ...

K E Y F E A T U R E S The Netron RDM10 is a universal dual input RDM splitter with an advanced feature set to cover a wide variety of applications. Its combination of a high density ten-port AB splitter with a two port EtherDMX node, DMX cue recording plus contact closures for preset and cue recall make this a truly universal tool for inst ...

DISCONNECT POWER BEFORE PERFORMING ANY MAINTENANCE! ELECTRICAL CONNECTIONS A qualified electrician should be used for all electrical connections and/or installations. USE CAUTION WHEN POWER LINKING OTHER MODEL DEVICES AS THE POWER CONSUMPTION OF OTHER MODEL DEVICES MAY EXCEED THE MAXIMUM POWER OUTPUT OF THIS ...

A C C O N N E C T I O N S The Obsidian Control Systems Netron RDM10 is rated 100-240V 50/60Hz and accepts AC mains power over a range of 90-264V 50/60Hz. Do not connect it to power outside this range. Damage resulting from incorrect connection is not covered under warranty. North America: A cable with a NEMA 15-5P plug is provided fo ...

F R O N T C O N N E C T I O N S - (12) 5pin DMX/RDM optically isolated ports - Ports are bidirectional for DMX In and Output - Full color OLED display - Encoder with Push-to-Select / Exit Button D M X P O R T S S T A T U S L E D s Ports LED Color Solid Blink Flashing/Strobing RJ45 LINK Green ...