Microchip Technology ATSAMR30M18A Datasheet

Text of Microchip Technology ATSAMR30M18A Datasheet

SAMR30 IEEE® 802.15.4™ Sub-1GHz Module Datasheet

Introduction The ATSAMR30M18A is an IEEE ® 802.15.4™-2003/2006/2011-compliant RF module for the sub-1 GHz ISM bands, such as 780 MHz (China), 868 MHz (Europe) and 915 MHz (North America), optimized for low-power applications. This module combines the ATSAMR30E18A SiP (System in Package), 16 MHz crystal oscillator, discrete balun, lumped element harmonic reject filter and required RF shiel

Industry-leading link budget:

• RX sensitivity up to -105 dBm • TX output power up to +8.7 dBm – Hardware-assisted MAC: • Auto-Acknowledge • Auto-Retry • CSMA-CA and Listen Before Talk (LBT) • Automatic address filtering and automated FCS check – Special 802.15.4-2011 hardware support: • FCS computation and Clear Channel Assessment • RSSI measurement, Energy Detection and Link Quality Indication – 128 Byte TX/RX Frame Buffer – I

High precision 16 MHz integrated internal crystal

– 32.768 kHz internal oscillator (OSC32K) – 32.768 kHz ultra-low power internal oscillator (OSCULP32K) – 16/12/8/4 MHz high-accuracy internal oscillator (OSC16M) – 48 MHz Digital Frequency Locked Loop (DFLL48M) – 96 MHz Fractional Digital Phased Locked Loop (FDPLL96M) • I/O and Package – 16 programmable I/O pins – 25-pin module package (12.7 mm x 11.0 mm) with castellated PCB pads • Op

Table of Contents

Introduction.....................................................................................................................................................1 Features......................................................................................................................................................... 1 1. Ordering Information and Module Marking.........................................................................

13.2. Canada (ISED)...........................................................................................................................56

13.3. Europe........................................................................................................................................57 14. Continuous Transmission Test Mode Errata......................................................................................... 59 14.1. Overview.............

Ordering Information and Module Marking

The following table provides the ordering details for the ATSAMR30M18A module. Table 1-1. Ordering Information for ATSAMR30M18A Model Number Ordering Code Package Dimension Number of Pins Description Regulatory Approval ATSAMR30M18A ATSAMR30M18A-I/ RMxxx 12.7mm x 11mm x 2.71mm 25 SAM R30 Module in Tray package FCC, ISED, CE ATSAMR30M18AT-I/ RMxxx SAM R30 Module in Tape and Reel package Figure 1-1. Module Order

The following table provides the ATSAMR30M18A module package dimensions.

Table 2-1. ATSAMR30M18A Package Information Parameter Value Units Package size 12.7 x 11.0 mm Pad count 25 — Total thickness 2.71 mm Pad pitch 1.2 mm Pad width 0.8 mm ATSAMR30M18A Package Information © 2018-2021 Microchip Technology Inc. and its subsidiaries Datasheet DS70005384B-page 7

Module Block Diagram

The ATSAMR30M18A module contains ATSAMR30E18A SiP, 16 MHz crystal, discrete Balun and lumped element Harmonic Filter. The following figure shows the block diagram of the ATSAMR30M18A module. Figure 3-1. Module Block Diagram ATSAMR30E18A Balun + Harmonic Filter (Discrete) 16 MHz RF_P RF_N RF_OUT SERCOM SPI/ ADC/AC/CCL SWD Interface/TC/ TCC GPIOs UART/I2C USB/EXTINT ATSAMR30M18A The ATSAMR30E18A SIP consists of two vertically integr

Figure 3-2. Interconnection between SAM L21 and AT86RF212B

SAM L21 AT86RF212B SAM R30 SERCOM 4 SPI-Client GCLK GENERATOR 1 /SEL MOSI MISO SCLK CLKM IRQ CONTROL LOGIC PORTx SLP_TR /RST External PA and POWER CONTROL ANTENNA DIVERSITY CONTROL RFCTRL DIG1 DIG2 DIG3 DIG4 PA20 PB15 PB16(2) PB17(2) PA10(2) PA11(2) PC16(F)(1) PB00(A)(1) PB31(F)(1) PAD1 PB30(F)(1) PAD2 PC19(F)(1) PAD0 PAD3 PC18(F)(1) 1. Alternate pin function and direction has to be configured by

Optional, clock output, usable as:

• Microcontroller clock source and/or MAC timer reference • High precision timing reference IRQ Interrupt request signal, further used as: • Frame Buffer Empty indicator SLP_TR Multi-purpose control signal (functionality is state dependent): • Sleep/Wake up: enable/disable SLEEP state • TX start: BUSY_TX_(ARET) state • Disable/enable CLKM /RST AT86RF212B Reset signa

Microchip Technology Microcontrollers Owners Instructions: