microbeau Apollo Operation & User’s Manual
Text of microbeau Apollo Operation & User’s Manual
Connecting your Machine
Adjusting Needle Depth
Additional Information
Troubleshooting
3
4
5
6
7
8
9
10
CLASS III SYMBOL
A Class III appliance is designed to be powered by a separated/safety
extra-low voltage (SELV) power source. The voltage from a SELV supply is
low enough that under normal conditions, a person can safely come into
contact with it without risk of electrical shock. The extra safety features
built into Class I and Class II appliances are therefore not required. For
medical devices, compliance with Class III is not considered suf
he first pen style machine
providing artists full control
of parameters that unleash
their creative vision. Compatible
with most power supplies
on the market, the Bellar is
a tool solution for all your
Micropigmentation (MP) needs.
RCA connectivity
Powerful 6W
MotorBolt system
specifically designed
to meet the demands
of Micropigmentation
Adjustable needle
depth system
Ergonomic grip design
f
he Apollo offers artists
an ergonomic grip design
and never-before-seen full
machine control. The standard
grip tapers from 24mm to
21mm. Other grip options may
be available. The Grip is crafted
from a solid rod of 6061 T6
aircraft-grade aluminum. This
polished and anodized grip is
steam sterilization safe, cold
sanitation solutions safe and
autoclave safe.
Autoclavable Ergonomic Grip design
Compatible with most membrane n
he Body is the core of
the machine that houses
all the machine components.
Constructed from a solid rod
of 6061 T6 aircraft- grade
aluminum, this module should
be sanitized by wiping it with
cold sterilization solutions
only. Caution: Do not introduce
any types of liquid inside the
system.
Apollo Body
Stabilizing Friction O-Rings
Apollo Body
Body isometric view
Body posterior view
CONNECTING YOUR MACHINE
HOW TO
CONNECT
YOUR
MACHINE
Insert the AIR mini DC (xxmm
x 1.7mm) into the back of
the MotorBolt and connect
to a Power Supply. The RCA
connector jack is concealed
by the MotorBolt housing.
Only use AIR mini DC cord
provided with the machine and
sold by any of our companies.
(Microbeau, DarkLab, FK
Irons)
Plug the AIR mini DC cord
into the Xion DC connector
Best connection
Improper connection
1
o adjust needle depth,
hold the machine body
and MotorBolt while turning
the Grip. A counterclockwise
turn decreases depth, while a
clockwise turn increases depth
(also known as needle hang).
Each time you turn the grip it
allows you to set your needle
precisely without involuntarily
turning while tattooing.
ADJUSTING NEEDLE DEPTH
Turning the Grip as the arrow direction
show decreases needle depth
Turning the Grip as
While voltage is a parameter that will vary from artist to artist, this machine has been tested
to operate at a minimum voltage of around 4 Volts with a maximum voltage of 9.5 Volts.
Depending on the type of needle configuration or brand you use, feel free to adjust the voltage to
obtain the desired performance.
Note: Exceeding 9.5 Volts is not recommended.
ACCEPTED NEEDLES
Use cartridge needles with internal membrane. This
The following tips will help you get the most out of your Apollo and avoid potential issues:
•
Always secure your machine. Dropping the machine can cause damage to the magnets, bearings
and motor brushes.
•
Use only cartridges with membranes to avoid contamination.
•
Do not exceed the suggested voltage.
•
Always use power supplies with at least 1Amp of current supply.
•
Rinse your needle frequently