NPK E Series Operator's Manual
Text of NPK E Series Operator's Manual
E SERIES HAMMERS
E200
E204
E201
E205
E202
E207
E203
“Use Genuine NPK Parts”
© Copyright 2020 NPK Construction Equipment, Inc. www.npkce.com H033-9600F E200 - E207 SM E
Hyd Ham Operators Manual 11-20
7550 Independence Drive
Walton Hills, OH 44146-5541
Phone (440) 232-7900
Fax (440) 232-6294
- 1 -
CONTENTS
SAFETY .......................................................................................................................... 3
INTRODUCTION ............................................................................................................. 5
CARRIER MACHINE COMPATIBILITY .......................................................................... 6
HAMMER SPECIFICATIONS ...........................................................
- 2 -
IMPACT STRESS WAVES AT THE END OF THE TOOL ........................................ 42
TOOL BREAKAGE ........................................................................................................ 43
TOOL BREAKAGE DUE TO EXCESSIVE BENDING MOMENT .............................. 43
CHARACTERISTICS OF THE BROKEN SECTION ................................................. 43
TOOL BREAKAGE DUE TO EXCESSIVE WEAR OF THE TOOL HOLDER
BUSHINGS ..........
- 3 -
SAFETY
Safety notices in NPK Instruction Manuals follow ISO and ANSI standards for
safety warnings:
DANGER (red) notices indicate an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING (orange) notices indicate a potentially hazardous situation
which, if not avoided, could result in death or serious injury.
CAUTION (yellow) notices indicate a potentially hazardous situation,
which, if not avoided, may
- 4 -
SAFETY
4. Fully extend the tool while charging the HAMMER with nitrogen gas. Be sure that
the retaining pin is installed. STAY CLEAR OF TOOL POINT WHILE CHARGING.
5. Do not disassemble a HAMMER before discharging the hammer gas pre-charge.
6. USE NITROGEN GAS ONLY! Store and handle nitrogen tanks per OSHA
regulations.
7. Avoid high pressure fluids. Escaping fluid under pressure can penetrate the skin
causing serious injury. Relieve pressure befo
- 5 -
INTRODUCTION
NPK is a leading manufacturer of HYDRAULIC HAMMERS and has the most complete
product line available anywhere. The success of NPK is due to our commitment to
quality, dependability and long life. The HYDRAULIC HAMMER has many unique
designed features and it is a company philosophy that the NPK HYDRAULIC HAMMER
can be brought to "like new” condition long after competitive products are scrapped.
You can feel confident that you have purc
- 6 -
CARRIER MACHINE COMPATIBILITY
These carrier weight ranges are intended as a guideline only. Other factors, such as
stick length, counterweights, undercarriage, etc., must be taken into consideration.
Mounting a HAMMER that is too heavy for the carrier machine
can be dangerous and damage the machine. Verify carrier
stability with hammer before transport or operation.
Mounting a HAMMER that is too small for the carrier machine can damage the
HAMMER,
- 7 -
HAMMER SPECIFICATIONS
HAMMER
IMPACT
FREQUENCY
MOUNTING
WORKING
TOOL
MODEL
ENERGY
STYLE
WEIGHT
DIA.
WORKING
CLASS
LENGTH
ft. lb.
bpm
lbs.
(kg)
in.
(mm)
in.
(mm)
E200
150
480 - 1,200
Excavator
500
(225)
1.65
(42)
12.2
(311)
Skid Steer
235
(107)
E201
200
500 - 1,200
Excavator
270
(125)
1.85
(47)
13.1
(333)
Skid Steer
550
(250)
E202
350
600 - 1,200
Excavator
425
(195)
2.24
(57)
13.6
(346)
Skid Steer
725
(330)
E203
750
560 - 1,200
Excavator
525
(240)
2.60
- 8 -
STRUCTURE
STRUCTURAL DRAWING
MODELS E200 – E203
5
OUT PORT
6
IN PORT
30
GREASE FITTING
A
MAIN BODY
AA
PLUNGER BUSHING
B
DRAIN PLUG
BB
PLUNGER
C
TOOL HOLDER
D
RETAINING PIN
E
RETAINING RING
F
UPPER TOOL BUSHING
G
LOWER TOOL BUSHING
HH
TOOL
J
IMPACT RING (SPACER SECTION)
L
GAS HEAD
M
CHARGE VALVE
N
PISTON
O
MAIN BODY SLEEVE (A)
P
MAIN BODY SLEEVE (B)
Q
TIE ROD
R
TOP NUT
U
WASHER
W
VALVE BODY
Y
VALVE BOTTOM CAP
Z
VALVE SPOOL