Metra Electronics 99-8724B Installation Instructions
Text of Metra Electronics 99-8724B Installation Instructions
CAUTION! All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
Metra. The World’s Best Kits.®
MetraOnline.com
© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
REV.8/27/18 INST99-8724B
INSTALL ATION INSTRUCTIONS
99-8724B
KIT FEATURES
• ISO DIN radio provision with po
1.800.221.0932 | MetraOnline.com
2
1. Unclip the shifter trim panel, then unclip
the shifter boot from the panel. Slide
the shifter boot through the panel, then
unplug and remove the panel. (Figure A)
2. Unclip the ashtray and set to the side.
(Figure B)
3. Remove (2) T-20 Torx screws securing the
bottom of the climate control panel, then
unplug and remove the panel. (Figure C)
(Figure D)
(Figure E)
DASH DISASSEMBLY
(Figure A)
(Figure B)
(Figure C)
4
Metra Electronics 99-8724B REV. 8/27/2018 INST99-8724B
3
(Figure A)
(Figure B)
(Figure C)
KIT ASSEMBLY
(Figure B)
(Figure A)
ISO DIN radio provision with pocket
1. Attach the radio brackets to the radio
trim panel using (4) #8 x 3/8” Phillips
screws supplied. (Figure A)
2. Attach the pocket to the bracket
assembly using the (4) #8 x 3/8” Phillips
screws. (Figure B)
3. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
4. Slide the radio into the completed
as
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
®
Metra recommends MECP
certified technicians
IMPORTANT
If you are having difficulties with the installation of this product,
please call our Tech Support line at 1-800-253-TECH.