Kramer VM-3H2 Operation & User’s Manual
Text of Kramer VM-3H2 Operation & User’s Manual
Kramer Electronics Ltd.
VM-3H2 – Contents
i
Contents
Introduction
1
Getting Started
1
Overview
3
Typical Applications
3
Defining the VM-3H2 1:3 4K HDR HDMI DA
4
Setting the DIP-Switches
4
LED Indications
5
Mounting VM-3H2
6
Connecting the VM-3H2
7
EDID Acquisition Policy
8
Upgrading the Firmware
9
Default EDID
10
Technical Specifications
12
Kramer Electronics Ltd. VM-3H2 – Introduction
1
Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world
of unique, creative, and affordable solutions to the vast range of problems that confront video,
audio, presentation, and broadcasting professionals on a daily basis. In recent years, we have
redesigned and upgraded most of our line, making the best even better!
Getting Started
We recommend that you:
•
Un
Kramer Electronics Ltd. VM-3H2 – Introduction
2
Recycling Kramer Products
The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce
the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected
and recycled. To comply with the WEEE Directive, Kramer Electronics has made
arrangements with the European Advanced Recycling Network (EARN) and will cover any
costs of treatment, recycling and rec
Kramer Electronics Ltd. VM-3H2 – Overview
3
Overview
Congratulations on purchasing your Kramer VM-3H2 1:3 4K HDR HDMI DA. VM-3H2 is a 1:3
distribution amplifier for up to 4K HDR, HDMI™ signals, that comply with HDCP 2.2 content
protection standard. The unit takes one HDMI input, equalizes and reclocks the signal and
distributes it to three identical outputs.
The VM-3H2 features:
•
A maximum data rate of 17.82Gbps (5.94Gbps per graphic channel) that s
Kramer Electronics Ltd. VM-3H2 – Defining the VM-3H2 1:3 4K HDR HDMI DA
4
Defining the VM-3H2 1:3 4K HDR
HDMI DA
This section defines the VM-3H2.
Figure 1: VM-3H2 1:3 4K HDR HDMI DA
#
Feature
Function
1
IN LED
Lights green when an HDMI source is connected
2
OUT LEDs (1-3)
Light green when an HDMI acceptor is connected
3
ON LED
Lights green when the unit is powered on
4
HDMI IN Connector
Connects to an HDMI source
5
HDMI OUT Connectors (1 to 3)
Connect to
Kramer Electronics Ltd. VM-3H2 – Defining the VM-3H2 1:3 4K HDR HDMI DA
5
To select the operation mode, set the DIP-switches as follows:
Programming
mode
HDCP Input
(MAC mode)
Force RGB
Lock Default EDID
DIP
1
2
3
4
OFF (up)
Normal mode
HDCP enabled Force RGB
EDID not locked
ON (down) Enable programming HDCP disabled Normal mode EDID locked
The VM-3H2 toggles between “Normal” and “Force RGB” modes.
In “Force RGB” mode, the read EDID is rewri
Kramer Electronics Ltd. VM-3H2 – Mounting VM-3H2
6
Mounting VM-3H2
This section provides instructions for mounting VM-3H2. Before installing, verify that the
environment is within the recommended range:
• Operation temperature – 0 to 40C (32 to 104F).
• Storage temperature – -40 to +70C (-40 to +158F).
• Humidity – 10% to 90%, RHL non-condensing.
Caution:
• Mount VM-3H2 before connecting any cables or power.
Warning:
• E
Kramer Electronics Ltd. VM-3H2 – Connecting the VM-3H2
7
Connecting the VM-3H2
Always switch off the power to each device before connecting it to your VM-3H2. After
connecting your VM-3H2, connect its power and then switch on the power to each device.
You do not have to connect all the inputs and outputs, connect only those that are required.
To connect the VM-3H2, as illustrated in the example in Figure 2, do the following:
1. Connect an HDMI input sour
Kramer Electronics Ltd. VM-3H2 – EDID Acquisition Policy
8
EDID Acquisition Policy
This section describes the EDID policy as a function of the state of DIP-switch 4 (Lock Default
EDID).
When set to ON (down), the input EDID is locked to the default EDID value.
When set to OFF (up):
•
If no outputs are connected when powering on the VM-3H2, the default EDID is set on
the input. The EDID of the first output that is connected after powering the device is
Kramer Electronics Ltd. VM-3H2 – Upgrading the Firmware
9
Upgrading the Firmware
To upgrade the VM-3H2 firmware:
1. Turn off the VM-3H2. Set DIP-switch 1 On (down). Turn on the VM-3H2.
2. Download and install the EPConsole application from the Koryo (Taiwan) Web site.
3. Download and extract the latest version of the firmware from the Kramer Web site to a
disk location on your PC. The firmware includes three files with names ending in .h00,
.h01, .h02. M
Kramer Electronics Ltd. VM-3H2 – Default EDID
10
Default EDID
Monitor
Model name............... VM-3H2
Manufacturer............. KMR
Plug and Play ID......... KMR1200
Serial number............ n/a
Manufacture date......... 2016, ISO week 14
Filter driver............ None
-------------------------
EDID revision............ 1.3
Input signal type........ Digital
Color bit depth.......... Undefined
Display type............. RGB color
Kramer Electronics Ltd. VM-3H2 – Default EDID
11
Detailed timing #5....... 720x576p at 50Hz (4:3)
Modeline............... "720x576" 27.370 720 728 824 880 576 578 596 621 -hsync -vsync
CE video identifiers (VICs) - timing/formats supported
1920 x 1080p at 60Hz - HDTV (16:9, 1:1) [Native]
1920 x 1080i at 60Hz - HDTV (16:9, 1:1)
720 x 480p at 60Hz - EDTV (4:3, 8:9)
1920 x 1080i at 50Hz - HDTV (16:9, 1:1)
1920 x 1080p at 50H
Kramer Electronics Ltd. VM-3H2 – Technical Specifications
12
Technical Specifications
INPUT:
1 HDMI connector
OUTPUTS:
3 HDMI connectors
PORT:
1 RS-232 for firmware upgrade
MAX. DATA RATE:
17.82Gbps (5.94Gbps per graphic channel) supporting resolutions up to 4K
@60Hz (4.4.4)
RS-232 BAUD RATE:
57600
COMPLIANCE WITH
HDMI STANDARD:
Supports HDR10 and HDCP 2.2. Supports deep color, x.v.Color™, lip sync,
7.1 PCM, Dolby TrueHD, DTS-HD, CEC (OUT 1 only), 2K,
The warranty obligations of Kramer Electronics Inc. (“Kramer Electronics”) for this product are limited to the terms set forth below:
What is Covered
This limited warranty covers defects in materials and workmanship in this product.
What is Not Covered
This limited warranty does not cover any damage, deterioration or malfunction resulting from any alteration, modification, improper or unreasonable use
or maintenance, misuse, abuse, accident, neglect, e
Kramer VM-3H2 Disconnect the unit from the power supply before opening and servicing
For the latest information on our products and a list of Kramer distributors, visit our website where
updates to this user manual may be found.
We welcome your questions, comments, and feedback.
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks