Kogan KAMN28UHFSB Operation & User’s Manual

• Unplug the monitor before cleaning it. • Use a clean, slightly dampened cloth to wipe the main monitor body. • To clean the screen: turn it off, unplug it and wait for it to cool completely, then wipe it with a dry microfibre cloth. • Do not use cleaning alcohol, ammonia-based liquids or other harsh cleaners. • This monitor is designed with ventilation holes on the back of the casing. Do not cover or block them. • Do not insert any object or spray any liquid into the vents. • Avoid placing the monitor near heaters, stoves, fireplaces or other sources of heat, as well as in rooms lacking adequate ventilation. • Do not position the monitor in unsafe locations. If the monitor falls, it may be damaged or may injure nearby people. • Unplug the monitor if it is not going to be used for an extended period. • Do not place heavy objects on the monitor, its power cord or any connected cable. • Do not open the back panel of the monitor, as it contains a high-voltage current even when not plugged in. SAFETY & WARNINGS

DP AUDIO OUT

1. Clear a table and place a piece of soft cloth on it to prevent the LED monitor from being scratched. 2. Lay the LED monitor flat on the table with the LED screen facing down. 3. Insert stand into the monitor, then secure the base by tightening the screw. 4. Stand the LED monitor up. ASSEMBLY

1. Place the mounting plate onto the back of the LED monitor, lining up the holes of the plate with the holes in the back of the monitor. 2. Insert the 4 screws into the holes and tighten. 3. Assemble the mount as per the instructions provided with the mount. 4. Connect the power and display cables to the monitor. Note: The 100 x 100mm VESA pattern requires 4 x M4 screws and a pitch of 0.7mm. Screw mounting kit is not included.

2. Connect the power adapter to a properly grounded AC outlet, then to the monitor. The indicator LED will illuminate blue. 3. Power on the computer, then power on the monitor. 4. Set the display mode on your computer accordingly. The recommended resolution and refresh rate are 3840 x 2160 @60Hz. OPERATION HDMI 1, HDMI 2 DP IN AUDIO OUT Adapter 12V@5A

• Press the button to display all the signal channel menus. • Press the button to exit the OSD menu. B. Up button C. Down button D. Right button E. Left button • Press these buttons to move the cursor to the needed function. • Press the corresponding button to change the selected function in the OSD menu. F. Menu • Press the button to display the OSD main menu. • Press the button to confirm changes made to the settings. G. Power • Press the button to turn the display on or off.

appears on screen after turning on the monitor and pressing the “ ” button. When using the monitor for the first time, the monitor will configure optimal settings automatically. 1. Press “ ” to enter the OSD menu. 2. Press to browse functions. With the desired function highlighted, press “ ” to enter the sub-menu. Press to browse sub-menus, then press “ ” to highlight the desired function. Press to highlight an option, then press “ ” to confirm the settings and exit the current screen. 3. Press “ ” to exit the current screen.

Main Menu Sub-Menu Options Description Picture Brightness ~0-100 Adjust display brightness Contrast ~0-100 Adjust display contrast DCR ON Turns dynamic contrast ratio on or off OFF ECO STANDARD/PHOTO/ GAME/MOVIE/ FPS/RTS Preset colour modes Colour Colour Temperature Normal Select colour temperature mode or allow manual colour configuration (USER) Warm Cool USER Red ~0-100 Adjust red value (USER mode only) Green ~0-100 Adjust green value (USER mode only) Blue ~0-100 Adjust blue value (USER mode only) OSD Setting Language English, 简体中文, 한국어, Русский, Español, Français， 日本语 Set OSD language OSDH-Position 0~100 Adjust OSD horizontal position OSD V-Position 0~100 Adjust OSD vertical position OSD Transparency 0~100 Set OSD overall transparency OSD Time Out 0-100 Set how long the OSD remains open after last input

HDMI1/ HDMI2 Select input source or allow manual selection Mute ON Enable or disable monitor speaker output OFF Volume High Adjust monitor speaker volume LOW Reset N/A Restore factory defaults for all settings Audio Source N/A Automatic identification of signal source Other Aspect Ratio Wide Screen Select the display's aspect ratio 4:3 1:1 Auto Low blue Light Off Blue light reduction adjustment Low Medium High Max Response Time ON Enable or disable overdrive for faster response time OFF FreeSync ON Enable or disable FreeSync OFF

PiP Mode PBP 2Win PBP 3Win Sub Win2 Input DP Select source to be displayed in the second window DP HDMI1 DP HDMI2 Sub Win3 Input DP Select source to be displayed in the third window DP HDMI1 DP HDMI2 PiP Size Small Change the size of the sub window in PIP mode Medium Large PiP Position Top Right Change the position of the sub window in PIP mode Top Left Bottom Right Bottom Left Swap Main Window Swap between the main and sub window Sub Window

Standby mode: <0.5W Off mode: <0.5W Display resolution 3840 x 2160 Pixel dimension 0.16 (H) x 0.16 (V)mm Display colour 1.07B colours Stand adjustment Tilt: -5° ~ 15° Height: 100mm， Swivel: -20° ~ 20° Active display area 648.9(H) x 369.3(V)mm Temperature Operating: 0° ~ 40° Storage: -20° ~ 60° Power DC 12V 5A SPECIFICATIONS

We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com