Levoit Core 200S Operation & User’s Manual

Model: Dual 200S Questions or Concerns? Please contact us Mon Fri, 9:00 am 5:00 pm PST/PDT at [email protected] or at 888 726 8520. USER MANUAL ...

Package Contents Specifications Safety Information Getting to Know Your Smart Humidifier Controls & Display Getting Started VeSync App Setup Using Your Smart Humidifier Care & Maintenance Troubleshooting VeSync App Troubleshooting Warranty Information Customer Support 1 × Smart Top-Fill Humidifier 2 × Water Filter Sponge (1 Pre- ...

described in this manual. • Place the humidifier and cord so that it will not be knocked over. Do not place near large pieces of furniture or in high-trafc areas. • When not in use, turn the humidifier of and disconnnect from power by removing the plug from the outlet. • Do not use the humidifier ...

• Ensure that the plug fits properly into a polarized socket. • Do not handle the power cord or plug with wet hands. Keep the plug and power cord away from liquids. • Your humidifier has a polarized plug (one prong is wider than the other), which fits into a polarized outlet only one way. This is a safety feature to reduce the risk of ...

A. Nozzle B. Water Tank Cover C. Water Filter Housing D. Water Filter E. Mist Tube F. Water Tank G. Float H. Base I. Display J. Cleaning Brush K. Power Adapter L. Max Water Line (Tank) M. Water Outlet Valve N. Noise Silencer O. Air Outlet P. Max Water Line (Base) Q. Float Brackets R. Transducer S. Secondary Float T. Hu ...

A B D C G F E A. Mist Level Button B. No Water Indicator C. Wi-Fi® Indicator D. Timer Indicator Note: The timer must be set in the VeSync app. E. Power Button F. Humidity Level Indicator G. Mist Level Indicator ...

Note: You can also control these functions using the VeSync app, as well as additional functions (see page 13). Power Button • Press to turn the humidifier • Press and hold for 5 seconds to pair with the VeSync app. See the VeSync in-app instructions for more information. • Press and hold for 15 seconds to reset the humidifier. T ...

Take the water tank of of the base and 2. remove all tape, including any tape on the float. Figure 1.1 Figure 1.3 Figure 1.1 Figure 1.4 Figure 1.5 Figure 1.2 3. Rinse and reassemble all parts before first use (see Cleaning, page 15). Note: • Check to make sure that the water filter is correctly in place. If not ...

1. Remove the water tank cover by holding the nozzle and pulling upward. Figure 1.6 Figure 1.6 Figure 1.7 2. Fill the tank with room-temperature water. Figure 1.7 Do not fill with hot water. Note: • We recommend using purified or distilled water to fill the tank. • Do not fill past the tank’s max water line. Figure 1.8 Figur ...

tank cover is placed over the mist tube, or the humidifier may not work correctly. Figure 1.10 Note: For best results, we recommend using pure essential oil. Filling & Refilling (cont.) 3. Replace the water tank cover. 4. Optionally, add 10–15 drops of essential oil into the base chamber ...