Lenze m850 Mounting And Switch-on Instructions

4 Document description 4 Further documents 4 Notations and conventions 5 Safety instructions 6 Basic safety instructions 7 Application as directed 8 Foreseeable misuse 8 Residual hazards 9 Product information 11 Identification of the products 11 Nameplates 11 Product codes 13 Equipment 15 Transport 16 Storage 17 Mechanical installation 18 Important notes 18 Preparation 18 Installation 18 Dimensions 18 Mounting 19 Electrical ins ...

WARNING! Read this documentation carefully before starting any work. ▶Please observe the safety instructions! Document description This document is intended for skilled personnel who work with the products described. The data and information compiled in this document serve to support you in the electrical and mechanical installation and commissioning. • The document is only valid together with the complete documentation of the produ ...

Conventions are used in this document to distinguish between different types of information. Numeric notation Decimal separator Point Generally shown as a decimal point. Example: 1 234.56 Warnings UL Warnings UL Are used in English and French. UR warnings UR Text Engineering Tools " " Software Example: "Engineer", "EASY Starter" Icons Page reference ¶ Reference to another page with additional information. Example: ¶ 16 = see p ...

personal injury and damage to property! Observe all specifications of the corresponding documentation supplied. This is the precondition for safe and trouble-free operation and for obtaining the product features specified. Please observe the specific safety information in the other sections! Safety instructions 6 ...

DANGER! Dangerous electrical voltage Possible consequences: Death or severe injuries from electric shock ▶Any work on the device must only be carried out in a deenergized state. ▶After switching off the mains voltage, observe the signs on the product. Product • The product must only be used as directed. • Never commission the product in the event of visible damage. • The product must never be technically modified. • Ne ...

• The product must only be actuated under the operating conditions and power limits specified in this documentation. • The product meets the protection requirements of 2014/35/EU: Low-Voltage Directive. • The product is not classed as a machine under 2006/42/EG: Machinery Directive. • No machine is to be commissioned or put into operation as intended in conjunction with the product until it has been determined that the machi ...

the occurrence of residual risks cannot be fully prevented. The user must take the residual hazards mentioned into consideration in the risk assessment for his/her machine/system. If the above is disregarded, this can lead to severe injuries to persons and damage to property! Product Observe the warning labels on the product! Dangerous electrical volt ...

- Never disconnect the plug when energized. The plug could be destroyed. - Switch off the voltage supply or disable the inverter prior to disconnecting the plug. • Installed thermal detectors are no full protection for the machine. - Limit the maximum current if necessary. Parameterize the inverter so that it will be switched off after several seconds of operation with I > Irated especially if there is a danger of ...

Nameplates Synchronous servo motors L Brake 15 1 4 33.1 14.1 8.2 8.3 8.4 10.2 10.3 11 18 2 14.2 5.5 5.2 5.6 5.8 14.3 5.10 27 5.4 5.11 22 5.3 30 5.9 Pos. Contents 1 Manufacturer / production location 2 Motor type 4 Motor type 5 Technical data 5.2 Rated torque 5.3 Rated speed 5.4 Rated frequency 5.5 Rated voltage 5.6 Rated current 5.8 Rated power [kW] 5.9 Efficiency 5.10 Continuous standstill torque 5.11 Ind ...

+2PTC" is given on the nameplate. Product information Identification of the products Nameplates 12 ...

Example M 8 5 A S 120 S 25 5 S 0 R C C 0 Meaning Variant Product code Portfolio segment M Product family 8 8 Product level 5 5 Product generation 1 A Product type Synchronous servo motor S Flange height 120 120 140 140 190 190 Motor length Short S Medium M Long L Speed 25 x 100 rpm 25 30 x 100 rpm 30 32 x 100 rpm 32 40 x 100 rpm 40 Degree of protection IP5x 5 IP6x 6 Cooling No cooling S Brake attac ...

Example AS 1024 - 8 V - K 2 Meaning Variant Product code Product family Resolver RS Resolver for safety function RV Incremental encoder IG Incremental encoder with commutation signal IK Absolute value encoder, singleturn AS Absolute value encoder, multiturn AM Number 2-pole Resolver for servo motors 0 2-pole Resolver for three-phase AC motors 1 Number of pole pairs for resolvers 2 3 4 ... Number of bits, steps or increments per revol ...

Their position, size and appearance may vary. Output flange Output shaft Spring-applied brake Motor connection Cooling Feedback Temperature monitoring Product information Equipment 15 ...

• Make sure that all component parts are securely mounted. Secure or remove loose component parts. • Only use safely fixed transport aids (e.g., eye bolts or support plates). • Do not damage any components during transport. • Avoid electrostatic discharges on electronic components and contacts. • Avoid impacts. • Check the carrying capacity of the hoists and load handling devices. The weights can be fo ...

• If possible, in the manufacturer's packaging • In dry, low-vibration environment without aggressive atmosphere • Protect against dust and impacts • Observe the climatic conditions according to the technical data - 4Environmental conditions ^ 32 Storage 17 ...

conditions". 4Standards and operating conditions ^ 31 • The technical data and the data regarding the supply conditions can be found on the nameplate and in this documentation. • Ambient media − especially chemically aggressive ones − may damage shaft sealing rings, lacquers and plastics. • Lenze offers special surf ...

• For fitting the transmission elements use the center hole in the shaft. • Avoid impacts and shocks. • In case of a belt drive, tension the belt in a controlled manner according to manufacturer information. • Be sure to carry out mounting in a manner free from distortion. • Compensate minor inaccuracies by suitable flexible couplings. Fastening ...

Power terminals may also carry voltage in the switched-off state or when the motor is stopped and may cause life-threatening cardiac arrhythmia and serious burns. ▶Disconnect the product from the mains. ▶Check that the power terminals are deenergized before starting work. • When working on energized products, comply with the applicable national acc ...