netvox R718PB13 Operation & User’s Manual

0 Wireless Soil Moisture Sensor User manual Copyright©Netvox Technology Co., Ltd. This document contains proprietary technical information which is the property of NETVOX Technology. It shall be maintained in strict confidence and shall not be disclosed to other parties, in whole or in part, without written permission of NETVOX Technology. The specifications are subject to change without prior notice. ...

1. Introduction ................................................................................................................. 2 2. Appearance ................................................................................................................. 2 3. Main Characteristics ................................................................................................... 2 4. Operation ........................................ ...

R718PB13 is connected with soil sensor (EC-5 soil sensor) As detectors for soil moisture, the value collected by the sensor are reported to the corresponding gateway. LoRa Wireless Technology: LoRa is a wireless communication technology dedicated to long distance and low power consumption. Compared with other communication methods, LoRa spread spectrum modulation method g ...

Turn on Press and hold the function key for 3 seconds till the green indicator flashes once. Turn off (Restore to factory setting) Press and hold the function key for 5 seconds till the green indicator flashes for 20 times. Power off Remove batteries Note: 1. At 1st-5th second after power on, the device will be in engineering test mode. 2. Remove and insert t ...

The device will immediately send a version packet report along with an uplink packet including soil moisture value. The device sends data in the default configuration before any configuration is done. MaxTime : Max Interval = 15 min (default) MinTime : None Note: (1) The device report interval will be programmed based on the default firmware which may vary. (2) Mintime and ReportChange are not supported by R718PB13 (Invalid configuration) ...

Downlink: 0C58000000000000000000 Device returns: 8C580A0000000000000000 (device current configuration parameter) 5-3 Select soil type R718PB13 selects soil types by instruction. Soil types include mineral soil, potting soil, and rock wool. See the documentation for details. Description Device CmdID DeviceType NetvoxPayLoadData SetSoilTypeReq R718PB13 0x0A 0x58 SoilType(1byte) 0x00_Mineral Soil 0x01_Potting ...

1. Excavate a hole or trench a few centimeters deeper than the depth at which the sensor is to be installed. 2. At the installation depth, shave off some soil from the vertical soil face exposing undisturbed soil. 3. Insert the sensor into the undisturbed soil face until the entire sensor is inserted. The tip of each prong has been sharpened to make it easier to push the sensor into the soil. Be careful wi ...