Marquee 0177357 Manual
Text of Marquee 0177357 Manual
STEEL EXPANDABLE GAZEBO
ITEM NO. 0177357
Steel Frame
Gazebo Size: 295W x 303D x 242H cm
Expands up to 570cm with handy leg mounted guide wheels
Powder coated frame – Charcoal
180GSM Polyester roof with 50 UV rating
242cm
570cm
262cm
295cm
Safety and care advice
Check that you have all the components and appropriate tools listed in this booklet before starting assembly.
Remove all fittings from their plastic bags and separate them into their groups.
Keep children and animals away from the work area; small parts could pose a choking hazard.
Make sure you have enough space to lay out the parts before starting.
Do not stand or put weight on the component parts during assembly, this could cause
A large top cloth
A small top cloth
M6*50
NO.
M
PARTS
PARTS LIST
QTY
PCS
Base plate
4
N
Wheel
2
O
Rolling
bracket
4
P
Big canopy
1
1
Q
Small canopy
AA
Screw
138
BB
Screw
8
M6
NO.
CC
PARTS
PARTS LIST
QTY
PCS
Allen key
1
DD
Peg
12
HH Plastic washer
6
EE
Metal plate
2
4
FF
Butterfly
screw
GG
Washer
4
3
Attach the base plates (M) to the two leg
poles(A). Secure using screws (AA). Then
insert screws (AA) and plastic washer (HH)
into the leg pole (B1/B2) as pictured. The
wheels (N) can then be added to the base
of the leg poles (B1/B2).
Step 2:
Use screws (AA) to connect two leg poles
(A) with the top pole (D). Then connect
each top pole(E) to the assembled frame (D
& A), using screws (AA). You will now need
two p
Secure poles (K) to the top support frames
using screws (AA). Then use the screws
(BB) to secure the cross poles (I) with top
pole (E).
Step 4:
Insert the sling tube (L) in the small roof
canopy (Q). Then use the screws (AA) to
connect the roof canopy with the top
support poles. Insert 2 or 3 screws on each
side before securing the rest of the
screws. Step ladders will be required to
safely complete this step.
5
To assemble the second roof frame, secure
pole (K) with the top poles (F & G) using
screws (AA). Then use screws (BB) to
connect the final support pole (H) to the
top poles (F & G).
Step 6:
Use screws (BB) to connect the support
pole (J) to the support pole (H).
6