Manfrotto 504 Manual
Text of Manfrotto 504 Manual
The Manfrotto 504 tripod is the main tripod used from 2nd year into
post graduate study.
The C100 cameras, Panasonic 101 cameras, Blackmagic cinema
camera and the Sony FS5 camera all use this tripod.
This tutorial will go over the basics of what each part of the tripod is
and does and how to pack it properly in order to not damage it.
Manfrotto 504 Tripod quick guide
Button on back
This toggle loosens
the arm grip
allowing you to
move it to a
comfortable
position.
When packing
away let the arm
fall downwards by
loosening here,
don’t force the
arm down as this
will damage the
head.
The tension ring on the bottom
increases and decreases the
tension on the pan movement.
The toggle on the side unlocks the plate which
can then be slid out by pressing the button on
the back.
The plate also slides on and off from the back.
There are 6 tightening locks down the legs
in total. Each can be loosened to extend the
height of the tripod. The tripod has a
maximum height of around 165cm tall.
You can open out the locks by pulling on
the side or close them by pushing down.
At the base of the legs are a
set of spreaders. Loosening
the screws allows you to
open these spreaders out.
Loosening the toggle on the arm allows
you to increase or decrease the arm’s
length to a more comfortab
Top of bag (head end)
Bottom of bag (feet end)
Tripod heads are naturally
heavier than their legs. Because
of this many of the bags are
offset slightly so that they lean
more towards the legs. This is a
counterbalancing design and
means, when held, the bag
should rest perfectly straight.
One easy way to work out if the
tripod is the right way up is to
stand both the bag and tripod
upright. The bags naturally have
a bottom section where the feet
of the trip