Hoppecke trak bloc Operating Instruction
Text of Hoppecke trak bloc Operating Instruction
Observe the usage instructions
and install in a visible position
at the charging bay. Only trained
personnel may perform work on
batteries.
Wear protective goggles, protec-
tive gloves and protective clo-
thing when working on batteries!
Observe the accident preventi-
on regulations as well as DIN
EN 50110-1 and IEC 62485-3.
During installation/commissio-
ning, maintenance, cleaning and
disassembly wear additional face
protection (impact-resistant visor
ac
trak® bloc batteries have low gas
emissions but are not completely free
from gas emissions.
It must be ensured that the charging gases
are drained off effectively during charging.
Covers on battery installation spaces must
be opened or removed.
The battery must be connected to the
charger with the correct polarity (positive to
positive and negative to negative) when the
charger is switched off. The charger must
then be switched on.
During charging, the te